Liverpool.90

Active Member

• Dec 4, 2012

• #1

Hi all, just wondering if anyone knows how much of a chassis can realistically be plated over? I have uncovered some terrible rot on mine and it has eaten away around an entire section. I have already had one side plated and now need the opposite side and the bottom doing. Is that too much? Also, correct me if im wrong but i take it that this would be an MOT fail if left as is?

Thanks.

 

Attachments

• 
  photo 1.JPG

  250.9 KB · Views: 557
• 
  photo 2.JPG

  144.8 KB · Views: 735
• 
  photo 3.JPG

  228.2 KB · Views: 557
• 
  photo 4.JPG

  191.1 KB · Views: 517

Last edited: Dec 4, 2012

Dr_evil

Banned

• Dec 4, 2012

• #2

Welded, I did a repair like that on mine last year

 

R

Ricksdef

New Member

• Dec 4, 2012

• #3

Mine has gone in the same place, will have it plated when i get round to it, your not alone!

 

Shifty1962

Well-Known Member

• Dec 4, 2012

• #4

Talk to Pressbrake. He'll put you right. It looks repairable to me.

 

muscrat

Active Member

• Dec 4, 2012

• #5

Definately a mot failure if left like that but not beyond repair, get it plated back to good metal but remove the wiring loom first.

 

M

markconnor33

New Member

• Dec 4, 2012

• #6

Definately repairable that.

I've seen some replace virtually 100% of the chassis, and call it a repairable chassis.

Mark

 

Tonks4x4

Active Member

• Dec 4, 2012

• #7

That would fail an MoT and can be repaired however....

If you go down the route of repair be prepared to do similar work further down your chassis year after year after year....

Might be time to start thinking about a Galv chassis.

Will work out cheaper in the long run.

 

F

ferretboy

Active Member

• Dec 4, 2012

• #8

A new rear x member with extensions will make it like new mate !!!

 

Liverpool.90

Active Member

• Dec 4, 2012

• #9

Thanks for the replies. I have been drooling over Pressbrakes xmembers for a while. Now i know it can be done I just need to get this patched then MOT etc so i can drive down to Essex to have it fitted. If im having it done it may as well be by the man himself. Anyone know how much he is charging these days?

 

300tdistu

Well-Known Member

• Dec 4, 2012

• #10

weld it you will get a few more years out of it yet, iv just done my 90 other month

then had a dig with screw driver to find this

cut body work off

and now

 

Hozza

Member

• Dec 5, 2012

• #11

I have just had some repairs done to my chassis - the front has been repaired and a new rear 1/4 chassis fitted, I asked the bloke if it will need more work done in the future but he told me it will be good for another 20 years!? And a new chassis wasn't economically viable!?

From this:
https://lh3.googleusercontent.com/-...bI/AAAAAAAAB5w/nJX4jxLWUpI/s800/IMG_0012.jpeg

https://lh3.googleusercontent.com/-...BI/AAAAAAAAB54/5NhWOoagq1Q/s800/IMG_0013.jpeg

To this:
https://lh3.googleusercontent.com/-xqi_gFqPKLU/UJjwc8qTcSI/AAAAAAAAB50/jJ62THJMVqo/s800/DSC_0055.JPG

 

T

Thor1950

Well-Known Member

• Dec 5, 2012

• #12

Hozza said:

I have just had some repairs done to my chassis - the front has been repaired and a new rear 1/4 chassis fitted, I asked the bloke if it will need more work done in the future but he told me it will be good for another 20 years!? And a new chassis wasn't economically viable!?

From this:
https://lh3.googleusercontent.com/-...bI/AAAAAAAAB5w/nJX4jxLWUpI/s800/IMG_0012.jpeg

https://lh3.googleusercontent.com/-...BI/AAAAAAAAB54/5NhWOoagq1Q/s800/IMG_0013.jpeg

To this:
https://lh3.googleusercontent.com/-xqi_gFqPKLU/UJjwc8qTcSI/AAAAAAAAB50/jJ62THJMVqo/s800/DSC_0055.JPG

Click to expand...

Well lets see :scratching_chin: You replaced the back quarter and repaired the front half ............. what makes you think the middle isn't rotten or soon to be???????????

What year is it? and what is it

 

300tdistu

Well-Known Member

• Dec 5, 2012

• #13

Thor1950 said:

Well lets see :scratching_chin: You replaced the back quarter and repaired the front half ............. what makes you think the middle isn't rotten or soon to be???????????

What year is it? and what is it

Click to expand...

:hysterically_laughi:hysterically_laughi

 

W

wonderdust

Member

• Dec 5, 2012

• #14

I had one fitted yesterday by Clive at Pressbrake yesterday, if you still have an MOT i wouldn't bother patching it would be a waste of money if your going to get one from Pressbrake.
Takes a whole day to fit so you would be looking at an early start if your comming from Liverpool.
You should contact him at "sales at blacksheepoffroad.co.uk" with your pics he should be able to give you a price.

His work is perfect and it would be well worth the drive having looked at pattern replacements, you wouldn't be dissappointed. If you want some pics of his work let me know?
Andy

 

Last edited: Dec 5, 2012

pressbrake

Well-Known Member

Forum Sponsor

• Dec 5, 2012

• #15

Looks like a typical chassis I see every week!
The trouble is the double skin capillary action sucking the water up, just check for swelling on the chassis showing the corrosion has spread inside.
I loaded myself up with pain killers yesterday(im injured) to do the x member so I dont fancy doing one for a week or two

 

Station House

Well-Known Member

• Dec 5, 2012

• #16

Sorry to hear you're struggling Clive - take it easy for a bit and make sure you get yourself back fighting fit

 

Hozza

Member

• Dec 5, 2012

• #17

Thor1950 said:

Well lets see :scratching_chin: You replaced the back quarter and repaired the front half ............. what makes you think the middle isn't rotten or soon to be???????????

What year is it? and what is it

Click to expand...

Because my man assures me it isn't and that's good enough for me.

A new chassis would have blown my budget taking into account everything else that needed doing. As long as I get another few years out of it.

92 Tdi

 

Liverpool.90

Active Member

• Dec 5, 2012

• #18

Hope you are feeling better soon Clive, I am in the unfortunate position of having the MOT expired so I'm gonna have to get this patched before I can arrange a trip down to you anyways. Hopefully I'll be able to get everything sorted in the New Year.

Thanks for all the advice guys.

 

R

Rockwood

New Member

• Dec 5, 2012

• #19

Those be just the bits you can see. Betcha gonna find more holes every few months to bodge.

 

pressbrake

Well-Known Member

Forum Sponsor

• Dec 5, 2012

• #20

Station House said:

Sorry to hear you're struggling Clive - take it easy for a bit and make sure you get yourself back fighting fit

Click to expand...

Thanks but you only get hurt if your being a idiot