auf_wiedersehen_pet
Well-Known Member
Different views.
auf_wiedersehen_pet
Well-Known Member
Started getting a few bits back on, OS frames and glass, arches, CB antennae, etc.
Got lots of new bits in order; gutter rails, roof bar seals, C pillar trims, etc.
Got lots of new bits in order; gutter rails, roof bar seals, C pillar trims, etc.
adam300tdi
Active Member
I still need to sort out getting 1 them bonnet vents.i think it realy suits it
StuRox
Well-Known Member
Thanks to this thread (Brilliant by the way) 
I too have gone the route of the trooper bonnet vent to aid cooling when I had a knackered radiator - got mine here...
Troopa Bonnet Scoop | eBay
Sorry for the slight hi-jack with pics - but think of it as flattery
I too have gone the route of the trooper bonnet vent to aid cooling when I had a knackered radiator - got mine here...Troopa Bonnet Scoop | eBay
Sorry for the slight hi-jack with pics - but think of it as flattery
RKServicing
Active Member
looking gooood
discoTomsk
New Member
Auf Wiedersehen Pet, you'll need to get a Decepticon decal and you can become mortal enemies!
brettguise
New Member
Looks good! What you using to stick the plastic trim on the doors? Cant wait to see it all back together.
auf_wiedersehen_pet
Well-Known Member
Thanks to this thread (Brilliant by the way)
Troopa Bonnet Scoop | eBay
Sorry for the slight hi-jack with pics - but think of it as flattery
Looking good mate. You look like you've put in the same position front to back. I spent ages faffing until I settled on that position.
auf_wiedersehen_pet
Well-Known Member
Auf Wiedersehen Pet, you'll need to get a Decepticon decal and you can become mortal enemies!
Enemies? A Disco driver needs all the allies he can get, especially when it breaks down.
The bonnet scoop must stay !!!!! It looks very cool.
Good isn't it. £20, six mounting holes (plus whatever airflow holes you decide upon) and some paint. Result!
Dave
Thanks. I guess trim tape for the rubbing strips and I may silicone around the edges of the chequer plate to stop water and **** getting in before I use black poppers in the original holes to remount it.
adam300tdi
Active Member
That's the 1 I nearly bought,is it decent quality?
StuRox
Well-Known Member
Cheers Rob. I think it just finds that position when you plonk it on the bonnet and suits it really well. How much did you cut in your bonnet as couldn't see much of a hole? I cut out most of the vent size in my bonnet from about 2 inches from the front lip from side to side to the back of the vent
Mr Noisy
Coming in your ears.
Cheers bud, all my own work from a sheet of vinyl and a knife
Get out of town!!
That takes some doing!
