Using the defender tunnel with a spot of trimming is a better option as you can then use the correct gaitor ....
You 'may' have to trim the seatbox slightly to endure full operation of the hi/lo diff lock lever
 
In your pictures have you moved the engine forwards at all? It looks like your transfer box is in exactly the original series position.
 
Hi Mick, thanks for the clarification, do you mind if I ask another question? I'm trying to think how to best word this, but what's the distance (forwards or backwards) from the point where the bell housing joins the LT77 gearbox to the rear of the under bell housing chassis cross member?

In your picture it looks almost in line / level, from this I can then work out the length of my R380 stubby bell housing and adaptor plate to the very front cross member and know how much space there really is for a V8.
 
Murtle said:
Hi Mick, thanks for the clarification, do you mind if I ask another question? I'm trying to think how to best word this, but what's the distance (forwards or backwards) from the point where the bell housing joins the LT77 gearbox to the rear of the under bell housing chassis cross member?

In your picture it looks almost in line / level, from this I can then work out the length of my R380 stubby bell housing and adaptor plate to the very front cross member and know how much space there really is for a V8.
Click to expand...

Hmm bit of a squeeze in an 88. But less fun in a 109!
 
From the back of that crossmember to the face of the gearbox is approx 25mm. Let us know the verdict would be interested.

Mick
 
Last edited:
:nothingtoadd:

well, its on the cards for mine, when I dig it out next.
200tdi disco engine and lt77 (already acquired) mated to series transferbox as like others I want to retain the red and yellow sticks :D

need to research disco bellhousing alternatives and what needs swapping, then accumulate the necessary parts.

bit old, but ere's the thread
http://www.landyzone.co.uk/lz/f6/dug-out-109-a-189574.html
 
Well it all fits and is going back together hopefully back on the road for 1st October
 

Attachments

  • image.jpeg
    image.jpeg
    92.7 KB · Views: 435
Yes all looking good it still has the rear prop off waiting for a uj should be here tomorrow but it goes through the gears fine and moves in 4 wheel drive. It is a bit tight in places but all seems fine, hopefully go for a decent run around later.
 
Hi Texpis, any chance we can swap numbers via PM as I need to discuss the fitting of the 5 speed kit. I'm in the process of fitting the kit but not sure about the h/L lever..
Cheers Andy
 
Last edited by a moderator:
landyandy675 said:
Hi Texpis, any chance you can call me on ************ as I need to discuss the fitting of the 5 speed kit. I'm in the process of fitting the kit but not sure about the h/L lever..
Cheers Andy
Click to expand...
You might want to send personal details such as phone numbers via a PM rather than posting them on an open forum. ;)
 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

M
Discovery1 lt230 in place of LT230R from a 12D?
Replies
3
Views
636
MrF
M
B
TD5 R380 gearbox selector bush
Replies
1
Views
132
Landmark2
Landmark2
Bezdonian
Potential new Series 2a owner with questions on powerplant and drivetrain
5 6 7
Replies
127
Views
13K
Rangieman123
Rangieman123
A
Classic LT77 Short stick to long stick conversion
Replies
7
Views
2K
Alex_melkadze
A
Maat
Disco 1 R380 output shaft wear question
Replies
1
Views
905
tottot
tottot