As if to prove that nothing's changed........ One of the younger lads in our circle was reporting on his night out at a Swansea nightclub (pre-lockdown) "This girl kept asking me for my phone number. I said 'Have you got a pen?' 'Yes' she replied. 'Well you'd better get back in it then, before the Farmer knows you're gone!"
 
Hello again folks. Last question (I hope. Yes I have trawled through the forum without any success in finding an issue similar to this one). I want to test the delay timer relay from under the LHF passenger seat but I haven't been able to find what pins I need to apply power and ground to. Just so you know I have the right component it is a long black relay with a large circuit board in it. It has 4 pins in the same position as the other relays but also has a large and smaller pin next to those 4. I have read through the schematic in RAVE but I honestly have no idea at all what it all means (as I said earlier I don't understand electrical wizardry but I do know how to follow instructions and ask if I know something is above my pay grade). I know I need to test it to whatever specs it is supposed to be from the factory but I also can't find those details either. So I need to apply power to it to see if I can hear it clicking (which I believe it was when I tried to start the car when this issue happened) plus make sure the ohms reading is in spec. I know how to test the other relays as it is easy to find the necessary information for them as they are a universal automotive relay.

Thank you in advance.


Craig
 
MacMan6107 said:
Hello again folks. Last question (I hope. Yes I have trawled through the forum without any success in finding an issue similar to this one). I want to test the delay timer relay from under the LHF passenger seat but I haven't been able to find what pins I need to apply power and ground to. Just so you know I have the right component it is a long black relay with a large circuit board in it. It has 4 pins in the same position as the other relays but also has a large and smaller pin next to those 4. I have read through the schematic in RAVE but I honestly have no idea at all what it all means (as I said earlier I don't understand electrical wizardry but I do know how to follow instructions and ask if I know something is above my pay grade). I know I need to test it to whatever specs it is supposed to be from the factory but I also can't find those details either. So I need to apply power to it to see if I can hear it clicking (which I believe it was when I tried to start the car when this issue happened) plus make sure the ohms reading is in spec. I know how to test the other relays as it is easy to find the necessary information for them as they are a universal automotive relay.

Thank you in advance.


Craig
Click to expand...
Sorry I can't help you but it may be worth sending a PM to @Datatek or @martyuk use the envelope symbol top right of page.good luck
 
52 classic said:
As if to prove that nothing's changed........ One of the younger lads in our circle was reporting on his night out at a Swansea nightclub (pre-lockdown) "This girl kept asking me for my phone number. I said 'Have you got a pen?' 'Yes' she replied. 'Well you'd better get back in it then, before the Farmer knows you're gone!"
Click to expand...
One of @tomcatalan old conquests presumably:D:D
 
You must log in or register to reply here.

Similar threads

R
What L322 to avoid?
2 3
Replies
52
Views
2K
Mark Piercy
Mark Piercy
Montyjohn
P38A Adding a valve to manually fill EAS tank and why did my pump fail again?
Replies
14
Views
960
Datatek
Datatek
M
Air compressor
Replies
12
Views
859
Mark Piercy
Mark Piercy
K
Is my RR Classic in EAS shutdown?
Replies
12
Views
875
kevleaper
K
O
03 L322 EAS ECU Can bus fault / ABS temp system deactivation
Replies
1
Views
628
oldradiotech
O