Wesley Pegden
Well-Known Member
If it is a mechanical fault then the box will have to come out. Whilst its out I would overhaul or replace the clutch release mechanism along with the plate etc. If it's the hydraulic cylinders that are at fault best to replace rather than use a service kit. I prefer to replace mine.
The slave cyl on a 2a is within a fabricated bracket on the drivers side of the bell housing. Check if the pedal is wet, this will indicate master cylinder failure.
Regards WP.
The slave cyl on a 2a is within a fabricated bracket on the drivers side of the bell housing. Check if the pedal is wet, this will indicate master cylinder failure.
Regards WP.