Ash2304
Active Member
Thanks! I've managed to sort it. It was the earth all along. But the earth to the back of the gauge itself
Ash2304
Active Member
I'll have a look In a minute. All of my other pictures in the thread are still working though I think? So what's the crack with them ones? Do they stay or do I have to go back through and sort all them out.
Bone9
Well-Known Member
They are working but I just had to redo all my photos on 2 forums
Ash2304
Active Member
What a blag! Well I'll just start using imgur for the new ones and hope the others stay haThey are working but I just had to redo all my photos on 2 forums
Ash2304
Active Member
I haven’t been haven’t been on here much, lost a bit of interest knowing I had to go and sort all the pictures out, however I’ve now changed them all so they should work. And a few progress pics...
Got the back door on
It’s currently glazed and has the catch and spare wheel on it. I’ll get some pictures of that on Monday.
Two new doors painted
And fit
I’ve removed and painted the front axle/diff guard, and I’ve also painted both axles black.
Front arches are on and a picture in the daylight (albeit very dusty)
The flatting and polishing has started and I’ve just got one side left to finish, the exhaust is now finished, a new steering wheel is on and the headunit and speakers are being wired in, so id say it’s very nearly finished. I’ll have more up to date pictures soon of all the little bits and pieces.
Got the back door on
It’s currently glazed and has the catch and spare wheel on it. I’ll get some pictures of that on Monday.
Two new doors painted
And fit
I’ve removed and painted the front axle/diff guard, and I’ve also painted both axles black.
Front arches are on and a picture in the daylight (albeit very dusty)
The flatting and polishing has started and I’ve just got one side left to finish, the exhaust is now finished, a new steering wheel is on and the headunit and speakers are being wired in, so id say it’s very nearly finished. I’ll have more up to date pictures soon of all the little bits and pieces.
Ash2304
Active Member
Thanks. Yeah it has a clear lense but a red bulb. The edge of the tread sits flush with the arch. I would ideally like to get rid of these tyres and get some all terrain ones that aren’t as chunky.
Mikewilliams
Active Member
Very nice. Proper rebuild!
Ash2304
Active Member
This week has seen the rear section of the exhaust made, painted and fit
I’ve wired the front speakers in and have had to send my headunit back to swap it for another one, seems as tho the newer kenwood units don’t work after a speaker had shorted out
And another picture of how it’s sitting at the moment. It’s nearly MOT time
Almost forgot about the two new rear work/floodlights. They’re very bright, very impressed with them, especially for only £12 off eBay!
I’ve wired the front speakers in and have had to send my headunit back to swap it for another one, seems as tho the newer kenwood units don’t work after a speaker had shorted out
And another picture of how it’s sitting at the moment. It’s nearly MOT time
Almost forgot about the two new rear work/floodlights. They’re very bright, very impressed with them, especially for only £12 off eBay!
Ash2304
Active Member
Thanks for the kind words. I’ve taken a few things out because of the photo bucket issue, so it’s not as in depth as I intended it to be.
I can’t quite remember off the top of my head but I think the tyres are 30x12.5x15 Goodyear Wrangler MTRs. I’m open to sensible offers for all 5, they’re are in excellent condition and loads of tread left, I ideally would like to be able to purchase a set of all terrain tyres for the price I get for them.
I would consider selling alloys and tyres as a set, the alloys are compomotive DWF, and id include the nuts, same again, a price at which I can buy a set of 5 alloys and tyres to replace them. Or if there are some sensible swaps out there which will fit on mine then I’m all for that
Cheers
