Datatek said:
Only got red squirrels over here and they hibernate, pigeons are a pain though. Missus won't let me blow them away which I could do from the kitchen window:eek:
Click to expand...

Greys around us, lots of them, and loads of Pigeons, don't usually bother either of them only do the Magpies for the sake of the smaller birds. There are about ten or twelve Magpies around at the moment, will have a cull shortly, before the little ones start nesting.
 
wammers said:
Greys around us, lots of them, and loads of Pigeons, don't usually bother either of them only do the Magpies for the sake of the smaller birds. There are about ten or twelve Magpies around at the moment, will have a cull shortly, before the little ones start nesting.
Click to expand...
Surprised you have squirrels left up that way, thought they would have all ended up in curry by now:eek::eek:
 
Guys. Thanks for all the input and help. It's well appreciated. Hopefully it's just the top. Will know more tomorrow.

Will have look round for local bosch shop, but if I have none local is the one you aimed me to Wammers correct? Bosch VE Turbodiesel Injection pump seal kit?

Bosch 1 467 010 467

Thanks
 
Datatek said:
Surprised you have squirrels left up that way, thought they would have all ended up in curry by now:eek::eek:
Click to expand...

A certain place raided somewhere around here a couple of years ago found to have a freezer full of dogs and pussies apparently. It's the culture though so it's ok. :D:D:D
 
wammers said:
A certain place raided somewhere around here a couple of years ago found to have a freezer full of dogs and pussies apparently. It's the culture though so it's ok. :D:D:D
Click to expand...

Blimey, I've heard about female circumcision but I didn't know the kept the pussies and froze them:eek::eek::eek:
 
Datatek said:
Blimey, I've heard about female circumcision but I didn't know the kept the pussies and froze them:eek::eek::eek:
Click to expand...

Don't think it was those people. Apparently dog and cat lover means something different in the far east than it does here. :D:D:D
 
Phil

Thanks, Just spoke to a guy in the Bosch centre in Colchester.. Both seals (just incase) £5.30 delivered next day.. Guy called Reece, total star!

Have decided to throw Glow Plugs, Fuel Filter and Leak offs whilst doing it, so will drop manifold but have to wait for the bits to turn up.. Hopefully tomorow, so will attempt it Weds

Thanks again guys for all your help. Really appreciated.

Cheers

Tel
 
Replacing the seals really isn't that hard of a job (just messy) and if you mark off everything with a few deep scratch marks in the housing before you remove anything you will be fine once this goes back together.

Level 1 nice and easy, no need to mark anything off for this level. But even if you have the correct Bosch tool, chances are you will round the head off and need to replace the bolt

FIPtopGasket.jpg


Now Mark everything off before you loosen and remove level 2! (also undo eleccy bits)

you must ensure this
LowerGasketGreen.jpg


Ends up back in the cup - practice this a few times before you put everything back together!
FIPinsidered.jpg


Now - as you forgot to mark everything off you need to know how to get your car started, well crack off your injector pipes and loosen all the bolts on the FIP push the middle plate back (towards bulkhead) and crank the engine. Once the engine begins to run move the plate around until you get a smooth tick over. Tighten everything down and take for a test drive :)
 
Johnny your a diamond... Thank you!!

Have read that if you havent got the Bosch Tool theres a chance beating an old 6 sided 7mm Socket on may work.. Will try getting the tool, just depends when it will get here by. Hopeing im not gonna struggle to find a replacement bolt if i do knacker it.


Thanks so much for the pics etc, is real help..

Tel
 
I had the correct Bosch tool but it still managed to round the head off and I couldn't tighten it down fully

hope this will help if you need to get a replacement bolt
pumpbolts.png
 
Also - make sure if you do need to fiddle around with where the plate lives because you didn't mark it off before removal. make sure you are running on Dino Diesel and not Veg oil or Bio - I found this out the hard way!!
 
Cheers! Am thinking i'll go on a bolt shopping spree tomorow just incase, really dont wanna be off the road for the sake of a bolt!

And im really not hopeing to go that deep! Kinda relying on it only being the top seal leaking, and not having to touch the next section down.

Tel
 
You must log in or register to reply here.

Similar threads

T
P38 thor engine top end leak
Replies
14
Views
1K
Grrrrrr
Grrrrrr
Montyjohn
P38A Adding a valve to manually fill EAS tank and why did my pump fail again?
Replies
14
Views
619
Datatek
Datatek
W
RRC 2.5 VM diesel injection pump timing.
Replies
2
Views
959
Wietse
W
P
Sport Coolant not circulating
Replies
11
Views
609
pllaw
P
A
Freelander Diesel injector pump leak
Replies
0
Views
461
Andy Ben
A