So you can give it a bit of stick. If in doubt, pull the whole hub off and get pressed outThe cv is dead that's why I'm trying to get it out
You can buy second hand units for £50So you can give it a bit of stick. If in doubt, pull the whole hub off and get pressed out
Hub, bearing and carrier?You can buy second hand units for £50
Range Rover L322 Hub Assembly Off Side Front 4.4 TDV8 2009 to 2013 L24045 | eBay UK
Ref: L24045. 2009 - 2013 Range Rover L322 4.4 TDV8 Off Side Front Hub Assembly with ABS Sensor. Range Rover L322. We willALWAYS resolve your issue but would ask that you call us in order to do so. We are a bonefide 'End Of Life' Vehicle Dismantlers situated in East Devon.
www.ebay.co.uk
Wrong I know, but I used compressed air to find leaks in mine many years back. Replaced condenser & dryer after which it was great for 3-4 years. Then got the slow leak problem. Eventually traced to the spindle seal on the compressor, which I only found while replacing the mag clutch. UV dye definitely makes it easier.
So, if your going to pull the whole unit off anyway.. You can have the Cv head pressed out and save the unit thenRange Rover L322 Hub Assembly Off Side Front 4.4 TDV8 2009 to 2013 L24045 | eBay UK
Ref: L24045. 2009 - 2013 Range Rover L322 4.4 TDV8 Off Side Front Hub Assembly with ABS Sensor. Range Rover L322. We willALWAYS resolve your issue but would ask that you call us in order to do so. We are a bonefide 'End Of Life' Vehicle Dismantlers situated in East Devon.www.ebay.co.uk
i wasnt planning to as theres nobody round here who can do alignment once the hub is movedSo, if your going to pull the whole unit off anyway.. You can have the Cv head pressed out and save the unit then
but if i haveto, i have to.. i can get it ballpark ok
Your only removing the hub carrier amd not the arms I hopei wasnt planning to as theres nobody round here who can do alignment once the hub is moved
It shouldn't need realignment afterwards
