Chappers12
New Member
- Posts
- 15
- Location
- Callington-Cornwall
tryin to upgrade the speakers in my doors but cant work out what size they r
does anyone know?
does anyone know?
freelander 1 door speaker size??
- Thread starter Chappers12
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Creeeg
Well-Known Member
- Posts
- 1,934
- Location
- East Sussex
13cm or about 5.5" in old money, I believe.
T'aint a straight swap, btw. You may have to make some mounting plates up to go behind the door trim or cut the old cone out of its plastic mount and use that.
Word to the wise: don't go for whopper loud ones with massive magnets on the back or they will foul the window glass when it drops down. Especially on the back doors. You may have to mount them proud of the door trim using spacers in that case.
T'aint a straight swap, btw. You may have to make some mounting plates up to go behind the door trim or cut the old cone out of its plastic mount and use that.
Word to the wise: don't go for whopper loud ones with massive magnets on the back or they will foul the window glass when it drops down. Especially on the back doors. You may have to mount them proud of the door trim using spacers in that case.
Chappers12
New Member
- Posts
- 15
- Location
- Callington-Cornwall
oh right would 5.25 ones fit in
i found these
Lanzar OPTI 5.25" 13cm 800w Two Way Car Components Door Speakers & Tweeters Kit | eBay
i found these
Lanzar OPTI 5.25" 13cm 800w Two Way Car Components Door Speakers & Tweeters Kit | eBay
Creeeg
Well-Known Member
- Posts
- 1,934
- Location
- East Sussex
5.25" dia probably would be OK, but, looking at those ones, they're WAY too deep!
Although without seeing them for real it's hard to tell, of course...
Chappers12
New Member
- Posts
- 15
- Location
- Callington-Cornwall
k, is their any way around it?
Chappers12
New Member
- Posts
- 15
- Location
- Callington-Cornwall
Creeeg
Well-Known Member
- Posts
- 1,934
- Location
- East Sussex
Better. I'd still try and find out just how slim they are before committing though.
And you'll still have the fun of adapting the existing speaker mounts or making new ones up. I have been through this so I am speaking from experience here (as it were)
crockett007
Active Member
- Posts
- 318
- Location
- West Berks
Someone on here has a pic of the mounting depths: from the door inner skin you'll get away with around 50mm, mounting the speaker on top of the door card gives you about 75mm.
