Hi, I need to get a part for my 90. I think its call the locking Barrel Lever. All I really need is that small retaining screw. See the picture. Does anyone know the part number please? In this picture its the part number 10 which I think is the locking Barrel Lever. Ive highlighted the screw I need.
Locking Barrel Lever - Part Number?
- Thread starter Rob3104
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
timtheenchanteruk
Well-Known Member
- Posts
- 4,633
- Location
- Leeds
any small self tapper will do it, think its about a No4 1/4"
non of those bits AFAIK (except the barrel itself) seem to be availiable seperatly, they all come with the door handle. eg P/N MXC7652
non of those bits AFAIK (except the barrel itself) seem to be availiable seperatly, they all come with the door handle. eg P/N MXC7652
SteNova
Well-Known Member
- Posts
- 2,200
- Location
- N. Wales, LL22
it's just a standard setscrew, take the lock out and pop to local bolt shop with it, ideally get a stainless torx one
Landyfox
Well-Known Member
- Posts
- 4,489
I used one from an old TV controller that retained the battery lid in place.
***TOP TIP If you have kids ***
Purchase them a small toy car or something similar, you normally find that when removed from the packaging they are screwed on to a stand by two small screws...BINGO these are a perfect size
Killing two birds with one stone 
***TOP TIP If you have kids ***
Purchase them a small toy car or something similar, you normally find that when removed from the packaging they are screwed on to a stand by two small screws...BINGO these are a perfect size
Killing two birds with one stone Similar threads
