Hi all,
Don't suppose anyone has a Safari 'type' snorkel that they are no longer wanting - just really need the outer body as I can plumb the rest up with the pipes I have.
Cheers
Stuart
Hi ,
I have got for sale the very much needed Series 3 Radiator Grille (Aftermarket badge)
This fits into the blanc LOGO space on the new plastic Radiator Grills (Part No 346346) it is made from Stainless Steel and Powder coated black and...
Just wishing to add my Penny’s worth as I consider Restricted Performance Mode to be a death trap. While I fully understand the intentions of this, my car has had a completely random fault that no one has yet managed to diagnose. The only thing...
That looks like someone has really gone to town on it! I hope mine doesn't end up looking like that when I come to change my bushes!
I have all the bushes and new bolts to do it, just need some time to get around to it as i'll be DIYing it...
I put a thin bead of black silicone in the bottom of the groove before fitting, slightly less aggressive than tiger seal but does the same job. They are supposed to be a dry fit but anything to help reduce water ingress has to be worth it!
You haven't said but I presume this is a 19J that doesn't deploy a heater plug relay ??
If not i'd fit one ... you don't need the specific LR unit, which has an inbuilt timer, just a 200A relay.
Like this ...
Good morning all,
Slightly concerning, but when I went to start the old girl this morning (held the key in between ignition and start) I heard crackling and a ploom of smoke come from the back of my stereo- fortunately I was able to rip it out...
Anyone have a clue what this noise can be?
No puff of smoke from the exhaust during start up or on acceleration, all plugs are dry, truck has 175,000km, oil level isn't rising from fuel, coolant reservoir has no oil or vice versa, normal...
Get a thermometer on the high & low side pipe & compare the temperature.
FYI, my little Merc C180 Coupe wasn't getting cold at idle, so checked the pressures at idle & 2500rpm. All looked ok, but the vents weren't as cold as expected. Then I...
if you get rid of the squeaks the rumbles and clunks become more noticeable, if you get rid of them you are just left with wind noise, and no one wants that!
None of those jobs require major tools or lifting the vehicle? I do all of those jobs on my driveway with each one (other than the screen) taking about half an hour. If you are travelling around the world and living in it surely that is even more...
Hi Guys. I searched the forum but i couldn´t find a much threads about 3 door Disco 1 :-)! I am in the middle of the restoration process, outer and inner sills must be replaced (spare parts from froggats and DDS). But i couldn´t find some repair...
Certainly not expecting it to be rapid or drive like a modern car, I've had it long enough to know that but there is a noticeable drop and complete lack of power when under load. It never used to be like this so something must be causing it but...