Latest activity

On the transfer box it’s located but some ones fitted a aftermarket vacuum thing under the bonnet with pipes that connect to the diff lock in the transfer box and a switch inside the cab but I don’t no when it’s off or on

thanks will give him a call when i have sorted out what i need

brake pipe by the looks. New pipe needed, don't drive it ;)

Okay, many thanks for the tips, guys; duly noted. Well after about 6 hours of troubleshooting today, I finally found out what the problem was. Immediately prior to the problem becoming apparent, I'd done some checks on the engine and carbs...

Hi I recently took wheels off to anti rust the underside of car and noticed a pipe was corroded and have disturbed it it is now leaking would some one be able to tell me which pipe it is not sure if it's brake or handbrake cable kind regards...

Thank you, exactly what I'm looking for.. I just could find it myself...

Thanks again for replying Sierrafery. I will check the voltage while cranking tomorrow when I go back to the vehicle.

Also did they put enough gas in it ? P38 needs 1200g which is a lot more than most modern cars..

Thanks

Thanks! Took a fair share of elbow grease! Especially getting the double curvature of the tubes right to follow the hardtop contour

I specifically chose the soft top to have the option of handheld camera operation from the back as alternative to the soft/hard mounted options with robotic arm and remote head.

this looks neat!!

You’ll be popular with the lads who ride bare back on here. Welcome to LZ.

This one's primarly for slow offroad automotive commercials and indie films and horseback riding scenes. But runs well on the road too.

try

If you need spares this guy is good Call Paul on 01206 211623 - office 07828 278465 07760 955966 07840 428888

Well deserved beverage me thinks to celebrate the stainless pipes … well thats my excuse 😂🍺

Exmoor black anodized billet ali hinges arrived today and they certainly don’t disappoint. I dout I could get a gnats eye lash inbetween the bushes they are that tightly made. Clock surrounds painted and fitted back into the dash, just waiting...

Well the proof is In the eating or in this case drooling 😂 out with the copper and in with the stainless. Fitted some brass olives each end to stop the hose clamps from pulling off. Looking rather good if I do say so myself. Only haste was that...

Back in the garage and away from the drawing board, for £20 a length next day delivered from BES plumbing I’ve got some 15mm 1mm wall 316 stainless steel seamless pipe, now lets see how it bends using my record plumbing bender !

Computer says : NO. Do it my way.

To be honest I was thinking the same thing when I was making them, back to the drawing board !

Put the buzzer on the indicator relay. It’s a lot easier.

Right, got her running but she's very lumpy & idling at around 90rpm. So does that mean I need to slightly loosen the second row of bolts on the FIP and knock it forwards a touch. Guess the pump needs to be rotated anticlockwise a touch too. I'm...

I thought it was just an interference fit. Clean and stuff into the groove. You could go crazy with tiger seal if you wanted to, but the next person to change the seals will hate you

The seal between the roof and side panel is old and tatty. Currently the roof leaks in the back corners. Anyway, I have new seals to fit. No obvious videos online, so how is it done… clean surface, apply double sided tape, or sealer then...

Welcome to Landyzone nice looking landy what kind of camerawork with car do you do

If you google "300tdi wiring diagram pdf" then youll get a 300 tdi wiring diagram, with all the wire colours. Even if yours is earlier, the wires will be the same colours. You want the "indicators and hazards" page. Looks like its green with a...

Hi all... need some help identifying the wiring for the dash light cluster.. Searched for awhile but can't find what I'm looking for (and it's not droids)... So.. these are the top row of light including the indicator repeater light... What...

F.A.B.