Latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Live updates
  • kernowsvenski
    It does look helluva busy under that bonnet though. Impressive stuff.
  • pwood999
    pwood999 replied to the thread My crazy diff ratio change idea.
    Yes I know that because you said it before, but it was a simple question given the amount of work involved. No "gotcha" content included.
  • R
    Yes but I already got it somewhere else first so I did not need your answer. But let's assume that you and blob are the two people who gave me information here, then it is probably 300 comments of insults and useless advice and two good...
  • R
    See the image...
    • IMG_0736.jpeg
  • Freddie17
    Freddie17 replied to the thread ignore thread please.
    Ah yeah, but… That’s because I have been ignoring it all 😁
  • R
    I have already mentioned that I work on my car in the street outside my house. That is one of the reasons why I do not want to do the change if it is unlikely to work. So now that you have this information please prepare another gotcha question...
  • kernowsvenski
    kernowsvenski replied to the thread ignore thread please.
    Whilst comprehensively ignoring this thread as requested I happened upon your post which immediately made me stop ignoring. I would like to draw your attention to post 180, line 5, and the corresponding reply in post 181. I put it to you Sir that...
  • Freddie17
    Freddie17 replied to the thread Tea on the Tailgate Meets.
    Nothing in Kent. Shame.
  • A
    A-frame cross member looks a bit crusty, think you need to start saving up, maybe.
  • pwood999
    pwood999 replied to the thread My crazy diff ratio change idea.
    Q) If you do go ahead, will it be done on garage ramps, or a driveway ? Just curious.
  • R
    I have looked at this and this has been discussed multiple times already on this forum and on another, but to save you looking for it the summary is that it is not a problem. It is not a problem because I am not towing, I am not loading the car...
  • A
    Anaconda replied to the thread Tea on the Tailgate Meets.
    I also don't go on FB
    • Screenshot_20250719_170935_Chrome.jpg
  • Hippo
    Hippo replied to the thread I would just like to say.
    Eye is going to try it this year. Eye fink eye recall some make seeds that will wuk. Others dun't. Still going to havva go. Just planted anuvva 19 news seeds
  • Hippo
    Hippo replied to the thread I would just like to say.
    Normally the down stairs hall is one ov two rads yer leave stat free wivva good flow, to allow the boilerer to dissipate heat when the rooms are up to temp. It allows the boilerer to expell heat after it switches oft, leaving the leccy pump...
  • andyfreelandy
    That would be fab. Thanks. My scrappie has got 3 x TD4s so no use. Will post photo. Will also check it is straightforward to take off as it is under the alternator !! 🫣
  • kernowsvenski
    Send a pic of it in the engine bay with the specific hose marked up. I'll keep an eye out at the local breakers.
  • Hippo
    Hippo replied to the thread I would just like to say.
    21.6mm ov rain over nite. Collected 700 litres. That wuks out at about 32 square meters collection area. This matches some of the results from the larger rain falls we av had previous which is good. Large result like this makes the loss ov rain...
  • Hippo
    Hippo replied to the thread I would just like to say.
    So cokroches and tratterers dun't want freelanders? Worrabout slugs and ear wigs?
  • Hippo
    Hippo replied to the thread I would just like to say.
    Still not sure worrit was. Eye has seen me squirrels ignore most burds. Sat by em. Landing or taking oft by em. Or flying past em. Even biggerer burds like pigwings. But when maggys are about me squirrels leave me garage roof and go int trees or...
  • Hippo
    Hippo replied to the thread I would just like to say.
    If yer ain't goranyfink to say, put a post up to tell us. We need to know these fings. ;)
  • codfather79
    codfather79 replied to the thread Series 3 Beyond salvage?.
    At the risk of sounding incredibly dumb, if I bought a 2 piece frame, could it be butchered to make a one piece? Or am I just taking this "as original as possible" too far?
  • Hippo
    Hippo replied to the thread I would just like to say.
    Orizontal bits get hit wiv more sunshine. So more potentual sun damage.
  • badfluffy
    now you have looked at what happens in top gear have a look at what happens when you raise the ratio when in first and go from a standing start
  • R
    Actually Henry this is the moment where you realize that you were wrong and you man up and admit that you were wrong. I said "The ZF5HP24 is a robust gearbox without any MAJOR known issues, and is not the WEAK POINT of my system, so I do not...
  • Hippo
    Hippo replied to the thread I would just like to say.
    Gardener.
  • andyfreelandy
    Original is leaking at the weld. Tried to aluminium weld but still leaks.
  • andyfreelandy
    Looking for an air con hose please. Compressor to Condenser. Part no JUF 000460 1.8 Petrol 2003. Anyone got one ? Thanks Thread 'Freelander 1 1.8 Air Con Hose' https://www.landyzone.co.uk/land-rover/freelander-1-1-8-air-con-hose.399630/
  • R
    People didn't tell me what may go wrong, they told me that I was an idiot for even considering the idea because they believed that their ideas were guaranteed to go wrong. Every time I explained why their ideas would not go wrong, with facts, or...
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    Just spray it with water, if it looks fine then, it's the lacquer/clear coat.
  • andyfreelandy
    Hi, Looking for the air con hose that runs compressor to condenser. 2003 1.8 Petrol Freelander. Labelled JUF000460 In working condition please. Thanks. Please PM with any offers.
Back
Top