Latest activity

And I think I said a different mile per hour. I hadn't done the exact calculation and I was only estimating, giving you an example. It doesn't matter if I was giving an estimate, or if I had made an exact calculation, because it doesn't change...

Confirmation of my above post, symptomatic of members' lightweight sense of responsibility toward this thread.

Got them from LRParts as it seemed the easiest option as no way of reprogramming the GM box to do command shift

I wish I had 4 gallon left after doing 300 miles, 300 miles is about average on my TD5, to the point of low fuel light coming on.

Did it on my TD 6, swopped them on to l322 TD v8 I have now. Where did you get them from out of interest?

Front one's are bonded to the bar need to be cut off then enery the bar after to get all the bits off.

Yes! Exactly! I saw your earlier posts, and have book marked them. If I don't get the dimension, I'll make it up, must be nearly in line with the gutter. Incidentally, the aluminium bars that are inserted into the hood, how do they attach to...

You keep making comments about problems that I would have, that would only exist if I was driving along at about 500 RPM. Therefore while you have not specifically said a particular RPM that I would be driving at, you have continued to imply in...

Grumpygel, sorry to bring up this old thread, but do you now have an answer to your question? I found traces of metal in my ird oil and i'm worried.

This afternoon’s fetteling saw the re trimmed dash back in, looks good with the sprayed green vent cover 👌

Exactly, but I don't need to do it, it was just an idea that I had. I decided to get some input from the Range Rover people on a Range Rover forum, in case there was an idea I missed. The torque converter not locking up was one thing that I...

see i just went ahead and did it, and there were plenty saying it couldnt be done and noone saying how to do it

But all of the problems that you talk about would only occur if I was driving at 500 RPM, so that number is relevant. I have not seen any serious engineering comments only hysterical garbage about situations that have no relationship to my real...

I have probably said this 10 times here, I will maybe do it or maybe not, and I am currently gathering as much actual information as I can from people with real world knowledge. One of those people was on this forum after a few pages, and the...

My shortest post was the word "yes" so your latest gotcha comment has failed, again.

Obviously something a bit below 1:1. But obviously the next lowest gear is the same and that is all you need to know. If you absolutely have to know the answer to the question then I suggest you look it up on Google because this is a complete...

so do the swap then

On the flip side.. this is your shortest post so well done on that 👍

No I was thinking something like juvenile or childish or 12 year-old girl mentality.

The attached image is from RRPhil on another forum where he has been helping me to understand the actual situation not the hysterical made up irrelevant situation. According to his calculations without the modification at 75 mph I will be doing...

but what are the 5th and 8th gear ratios

Yip, approved theory my mate. I get around 40k miles from my 38's tyres and they are starting to micro crack... It's time for new ones even though there is still a decent bit of tread left.. 🤔 OH the choice🤷

I have a concrete floor in the garage and shît still goes missing 🤷 For me it's mice🤔😝

Especially if it's had water leaking into the steering wheel from the windscreen or body seam above😳

Is that some homophobia I detect?

We say "it's doing it's job" 👍

Good to know that you are imagining me wearing Lycra, and not helping to solve my simple engineering question. There is a word for people like you. What is that word again, I forgot?

Yes of course, and given my car's engine an d gearbox operating range this will not happen. Everyone here seems to think that this minor changed to the differential ratio will suddenly cause me to be driving around at 500 RPM on the highway...