Latest activity

And? I gave a technical answer. Do you complain about @Hippoo's squirrel grooming thread in the tratterer section?

Adrian Flux have just pulled some magic out of the bag so at least bringing the camper home feels a little more realistic.... bless them

Hello All, Anyone had that noise on his/her TD4 already - TD4 ? First it was when the air con was on. After a while of driving it turned also up w/o air con. It seems to come from the air con belt or somewhere there. As I was a bit away when it...

Technical Forum.

input shaft of the gearbox is always turning no…? i thought maybe its something there. dizzy and cam gear what should i look for when inspecting those exactly? valves should be set correctly. yes oil coming through the rocker shaft and ive...

Having gone through similar recently, I suspect we have the same issue with injectors. In my case the low temp was solved with a new thermostat - PITA but done. Our 2004 FL1 was smokey all the time, so did all the following: Checked & cleaned...

If it's in neutral, then can't be gearbox? Check valves first. I'd look at the dizzy, then the cam gear. Couldn't see from the video, is there oil coming through the rocker shaft?

xD its a bit of a train rn yes

Bump price crash, final weekend offer. Come on you hoarders buy some tatt. The 38 has been gone 6 months and I need this rubbish gone. It’ll be on eBay later if no takers.

There's already a place for it. Yes it needs sanitizing to remove the non-informational posts, but most stuff it there.

Can't remember if you said you have a Nanocom or not ? If you do, then it should be easy do get the GEMS how you need it, before building the other vehicle.

Are you Stanley Sir!'s twin brother? Did you have to wipe your fingers after they typed all that diarrhea?

Erm. Sorry. I'm with Rodney Dave. https://www.google.com/search?q=landyzone.co.uk+freelander+what+are+the+biggest+tyres+that+fit

So the warning light is just a warning light .... can you engage the PTO and spin the capstan/winch (so you know it's working) and then disegage the PTO and see if the capstan/winch still works ? If it stops working when the disengage lever is...

thanks for replying. ive tried it every way possible, hi/lo in neutral and in gear out of gear, hi/low engaged and in the gears (then the pto runs plus i get drive power), all ways using the clutch does engage and disengage the pto but the...

If you'd like the measurements I'd give you.

All, i rebuilt this engine and paired it up to my gearbox. however, im hearing a knock. All bearings in the engine are new and have maybe max 5 minutes of runtime on them. I did feel/seem to have a slight gearbox knock from before when i put...

I don't have a PTO on my 90 so won't be a huge help here, however, that 'thingy' with the wires on looks like a pressure switch which when trhe PTO pump is running will light up the 'do not reverse' warning lamp on the dash. The PTO is driven by...

It’ll clean up nicely. This was in the same state prior to a cut and polish.

🤣

True that originality seems to be valued more highly than a fresh re-paint even if it's a pro job. But does the paint they used for these back in '89 lend itself to being polished (by which I mean T-Cut or similar abrasive cutting polish)?

Very Tidy indeed! Congrats.

Looks tidy 👍

You could narrow it down a bit… What colour paints, and in what order?

With the running gear of a 110

Dog walked. Coffee made. Thread ignored for the morning. 👍

Morning All. :D Lovely day here. :) A "free" day (no chores). :) Have a great day! :D

Chapter 2 ; Agatha Christie

Thank you, Indeed they replaced all the belt a couple of months ago. Not sure the crank pulley has been replaced but probably was not long ago as it looks very clean. Any vérification I could make on the crankshaft bearing ? Or just drive until...

Early advert for a prototype Freelander.