Its a 3.5mm stone so the scanner says, must be moving, pain is constant and I'm only getting part relief for about 2 hours from painkillers, taking codein and paracetomal together. Hopefully it'll ease soon, not getting anything done 😕
Remember they tend to leak under the folds, so do the soapy water check at various heights.
For the schrader valves, although I don't use them much, I did when rebuilding my engine a while back just raise & lower the car manually. One thing I...
If the gauge went above normal means it was too hot already cos it leaves the middle at 120*C and the electric fan kicks in at 110 by default, so if it ran full time means there was more than 110*C and that will kill the engine on a long run...
The O-ring seal is a bit ‘belt and braces’ because the lead screw has a lip seal which should prevent any fluid escaping. So, you may need to have a look at this seal too.
New Venture Gear was an American company, so I don’t know if the...
Well well well...
Removing the prop was a super easy task. Came out easily and down to the floor with 4 straps. It's not heavy in my opinion... I was expecting 200kg 😂
The afternoon was pretty good, I took it off and the more I looked...
Same as all airlines. I wanted to book a week's holiday in Tenerife in October to meet up with the dottir, hubby and grand kids. As it is skool half term the flights are eye watering high. So booked outgoing flights a week earlier with returns a...
A mate has a spare Defender pedal for me to try, also I'm getting a second hand Disco Radiator to mock up and see whats what, might need the Series Rad yet as both can be used from what I've heard
That is why I have a low amp fused bypass on mine. Enough to keep things powered, radio, tracker, alarm etc, but as soon as you turn the ignition on and the glow plug tray kicks in the fuse will blow! You just need something similar for the alarm...
You will need a lot of photos for people.
Engine 300tdi(take a photo of the passenger side of the engine,this will confirm if turbo still fitted)
Take a photo of the engine mounts on chassis & engine
Unsure what make that chassis is...
Tremendous storm yesterday so finally got are rain, water tank 1/2 full so ok for a while same as @Stanleysteamer temperature has dropped today bit more comfortable, nordvpn have reconfigured the system so have to re-flash are modem so that will...
I would appreciate your thoughts – I am rebuilding the cylinder heads on a 3.5 v8, carb version, from a Discovery 1 which has 75,000 miles on the clock which I believe to be genuine. I am going to re-grind the valves which all look good and no...
I am waiting on the return of two EGR and i have two in the shed that need doing, when i get time to sort them out which would be this weekend sometime.
Wifey is a bit miffed. :mad:
It seems at first glance that due to some unfortunate oversight by "others" I have been omitted from the funeral guest list.
She has raised this matter with the cabal led by her brother that has been making the...
True although the seats on the journey Bournemuff - Carcassonne are very cheap!
We cannot knock the convenience though. Carcassonne is only 45 mins from here and Hurn Airport only about 10 minutes from our home address.
Failing that it is...