Latest activity

I cannot remove the solenoid and drive to my local friendly garage motor to get a new O-ring. So I would need to get the O-ring first and then take off the solenoid and put the O-ring on it and replace it. But I cannot find any information on...

this is at standard height 👍

I have a 2002 4.4 Petrol L322 with front and rear diffs at the ratio 3.73, with the 5 speed ZF5HP gearbox. My front and rear diffs are badly rusted on the outside but I do not believe that they need to be changed. I plan to make a trip from...

I'd go for a dried cracked oring problem🤔 If they hadn't of replaced the oring it could have emptied itself and you'd be dealing with a dead transfer box reckon 😵

Can I repair the compressor? I have looked on line form here but can't find a kit for my compressor. I am prepared to import if needs be

I have discovered that the previous owner of my L322 has most likely raised the height by 5cm by reprogramming the suspension offset. I can see this issue in my ride heights and in the offsets using my cheap OBD reader. My iCarSoft V2 allows me...

I've never ran LPG so I can't really comment on it. For a V8 I don't thinks it that bad on fuel , well it's better than my dads l322 4.4 petrol ,fuel gauge moves more than the bloody rev counter.

Morning Gents, Is anyone able to carry out valve block repairs for a 2000 P38 4.6 V8? My vehicle holds air at maximum height overnight when locked, but if I don’t raise it, it drops to entry height. I’ve recently replaced the air compressor and...

Hi all New to this site. Im in Cape Town South Africa. The compressor in my 2014 L494 RR Sport keeps running until it overheats, then it locks the suspension in normal ride height. I have tested all the connection and tank for air leaks and...

Looks like another well organised job. It's a pleasure to watch your updates. You remind me how I ought to do things. Interesting to see some parts came from Rimmer Bros. I was in there on Saturday morning as they are just across town from where...

I have a 4.4 petrol 2002 L322. I changed the transfer case oil and found that it only had 1/3 the required amount. After that I noticed a leak that is most likely coming from the join between the solenoid and the transfer case. From images that...

I have heard lpg can ruin engines due to the gunk , similar to what comes out of a forklift.

Hi All I bought a brand new Defender in December 2023 and it currently has 8,500km on the clock. Being new to the world of Land Rovers I have been very impressed. Recently however, I have noticed a vibration on the steering wheel, especially when...

Ah, no. They don’t look like they can be adjusted at all - at least, I’ve not seen anything that would suggest they can be. I ‘think’ they are heated though, but not tested that thought (or what makes me think that!!!)

Glad to oblige :vb-jester2::vb-party2:

What stood out for me here is that Halfords wanted £30 Quid to fit a Series battery ! Two spanners, job done ?

Well, after examination, yes ... This is very well built, good solid relay, nice pc board and wiring with quaity connectors etc. I'll give it a go.

Sorry forgot accompanying pictures never like cutting out good material when unnecessary so much of this is good inside and out

Does it make me more brave that it's a 4.0 that I daily drive to work and isn't on LPG ?

What you think have cut out damaged outer cill inner cills are rust free, put camera inside no rust or outside or end, don't really want to cut into good factory metal, so have suggested a joggled joint at white line on outer cill at stiffener...

the man mentioned it: I used it myself too once( THIS ) and felt some slight improvement but not more than with Liqui Moly or Wynn's.

Hi, I am new to.this forum and would really appreciate some advice. I have a 2005 freelander 1td4 that has developed an annoying intermittent misfire when the engine reaches normal temperature. As I say it only starts when the engine is up to...

Mine aren't to bad but as you say are in use. You are probably best just making some out of thin ply and covering them?

Thanks, I was thinking down those lines, just the fact that it runs so well and only now and again made me rethink I will change the sensor and see how we get on, thanks again for your response.

if your bonnets not secure this device is easily overcome by removal of device and original post terminal re-fitted

Morning All. :D Raining. :) Got to go all the way to Basildon to a bank because my wife's identity cannot be confirmed by their online apps. They use equifax etc. to determine that you are a real person. All bills are in my name, she has no...

Indeed. Just need to know someone who can do a decent repair job on the rear sills. The rest of the car is pretty decent corrosion-wise and I'd like to keep it going for a few more years yet.

+2^^^^^^

Looking good there. Always handy knowing someone with a lift 😉

That's a classic sign of low gas level, get it regassed at a specialist