Latest activity

Greenlane association or local off road clubs for green lanes.. If you want off road fun, go for a pay and play site here you can get stuck and winch away to your hearts’ content.

Get a couple of empty chinky tubs n put yer stuff in them.

Can ye not glue in back in without sticking yer digits to the tap, let us know & we will call a nice fireman to help you. Ps wear clean pants 🤣 🤣

Thank you both for your replies, yep followed the bible to the letter. That is interesting the abs pump is used in emergency situations and changes my way of thinking. I will put a video up of what my EPB is doing, this video is thanks to a...

Or make something out of ply and cover in black or grey felt.

Right, I’m tired, so I’ll have to stop ignoring this for today and start again tomorrow

I've managed to hurt my Knee pretty good, this has brought progress on all fronts down to a crawl, however I have managed to get the brackets for changing the transfer box finished. I'll have to do this on the floor, but it is a nice smooth, dry...

Plastic fing has come out me kitchen sink mixer tap. Sort ov shapes the water nicerer assit comes out said tap. Fink its snapped. Seems to be some left int as if its screwed int.

He spelt ***** wiv out the i making it ****.

Insurance costs are mental for young drivers, the young lad at work was quoted 10k for a fiesta. Have you added a black box as this brings it down a fair bit. (he wont want one fitted lol)

Looks like the O/P has come, and gone. l hope he finds the Land Rover that he wants.

Note Cruise control won't work with the O/D you need to fit a speedo healer.

Is the a/c compressor running? not the belt spinning but the centre of the a/c pulley spinning. Most a/c is pretty simple, pressure switch sees pressure and allows the relay to send power to the a/c compressor, so a quick test would be to see if...

Gonna be cold all the time. They all have the turning circle of a super tanker.

https://www.glass-uk.org/

"Ideally looking for legal routes" What other sort of routes would you be looking for, illegal ones?

That’s so helpful, thankyou for sharing your knowledge.

Luck of the draw I guess. The first bushes we fitted were Britpart poly bushes to the panard rod, failed in less than a week. Replaced with Britpart OEM and have been good since.

I never seen any swearing :mad::mad:

Sounds mad for me but I do have blue bag panard poly bushes on mine. Could not get any others at the time. Do have super flex for for other bushes.

Errrr Nope !!! I just moved tools from my old boxes into my noo one. :p

Yes, don't tell them anything except know mods which you need to declare. My son's was £2.5k for a Ninety with a 200tdi conversion, mind you that was 10 years ago. Still agree £11k seems rather high.

They are the correct bolts but failing that I'll have some spares kicking around somewhere. ill go have a look just now for some decent bushes, I'm not bothered about whether or not they're poly but hopefully there's a bit less to go wrong with...

I have used Britpart oem with no problem. Since you have now learned a valuable lesson you would do well to replace your other aftermarket with oem. You can buy a kit for not a great deal of money.

Try Youtube sure there's a couple of videos

If you fit polybushes then buy good ones, cheaper ones are crap. Not all bolts are the same, some are metric some are not.

They were aftermarket. After the first ones failed I went back to the seller and he sent me what to took to be some decent aftermarket ones. Clearly not. I either go for oem metalastic bushes or poly

That's a problem for sure. Do them up as tight as possible and see what happens. What bushes did you fit, random aftermarket, oem or genuine?

The bolts are correct panhard rod bolts but even tightening it up to 110nm made no difference. It was already ft as they were only supposed to be 88nm. I took the rod off and there's a tiny bit of slack when the bolt goes through the bottom bush...