Finished the door panels this afternoon.
Used this: https://ebay.us/m/h4Hdh4
1m at £14.95 will do 8 door panels.
It is also such a close match to the original that if any are ok they can be left alone.
LHS one is representative of the...
The 110 does not have an rtc damper. That was the td5. So just standard damper. The old box caught the bottom of the of the drop arm on the steering guard but the one previous one to that didn’t. So I will have a look in the morning and see if...
The rear bushes are usually so hard to remove it's only worth doing if the arms are good.
Replacement bushes will need pressing in unless you pay extra for the complete unit and this requires a press.
Many thanks. That’s what I did. So happy with that.
Having now taken it for a drive I Need to have a closer look at it and see if it is contacting the steering guard. It has no play and feels good once moving. But it feels like There is more...
Pre-Installing an inverter/charger on a plyboard with large Anderson connectors and all cabling in such way that is quickly separable.
Due to Dutch tax-laws the canopy must be easy seperable and removable in 1 motion.
First photo is the pre...
Thanks for the link, paid my £5 and downloaded on three devices without any issues. It gives a good insight in to how advanced JLRs new vehicles are now.
I've tried to explain what you all said to my father and said we should do our own checks first, based on the information I've received.
I've been disregarded yet again, and a recovery truck has just picked it up. No doubt they will say it's a...
Put all 4 bolts into box.
put on steering arm
Turn steering(engine running) a few times
to center everything up
Then do that mounting bracket up.
No bushes etc on the thread just that big washer