Latest activity

Hello there. Hope you are still out there, some 4.5 years later. I could really do with a 55" throttle cable for my RRC. I've converted a Euro-spec vehicle with the 2.5VM engine to RHD. I can't help with the question you posed, but wonder if you...

@Matt Poiner Had a Quick Look for you. Like mine & comes with the ends to connect pipe onto

I had this exact issue. Turns out that the transfer box was completely empty of oil! 😂 Filled it up, job done

B918 vas 1985 v8 petrol

What did you put it up for out of interest? I mean it is still generally hard times for people but there will be plenty out there with cash waiting for the right project. You can't really go too far wrong with something thats already been...

It seems my problem here has morphed into another one. The good news is that it wasn't the sound of the water pump failing. The not so good news is that it's the starter getting stuck on the flywheel. That explains the sound continuing briefly...

Thanks for the replies - I'll keep a close eye on fluids - it's pure water so hopefully it's the a/c but does it whether or not it's been on. It dries up and leaves no marks on the drive. As Freddie17 says its coming out near the prop tunnel :-)

Sorry, the text failed to add. You could try contacting these guys, to ask whether they provide a purchasable item.

Rubbish parts then. I keep a spare rebushed panhard rod ready for a quick change.

There is nothing for second row doors, isn’t it?

Just the bog standard ones, I don't tend to fit polybushes

Were the duff bush's poly type or metalastic type. Six month's is a short time for any type. There sure are some poor quality parts about these days.

I kind of presume its ok as i have tried pressing it down at different levels and only when its fully down i can hear a solenoid or something switching , try again with it not fully down and no sounds are heard !

Fuse-1 feeds lots of things. With the fuse removed the contacts will always have 12V on one side & 0V on the other. Fault finding the window switch pack needs the fuse installed, or it cannot work !! Ordered a Nanocom yet ??

Checked spare wheel Renewed pollen/cabin filter And sorted some suface rust in boot (more underneath I suspect)

Congratulations and commiserations on the prompt sale of your Landy.

And sold already!

Yeah that would be great if you could send a number over and I’ll have a look! Cheers

eer . . .. what fuse ?

The RAVE procedure is less than ideal because it does not mention the Jatco Fluid Level plug or how to top-up correctly. 1. After draining old fluid, refit the drain plug. 2. Remove the Level Plug - see picture & make absolutely sure you remove...

HI, I had a functioning gear box on RR L322 3.6 TDV8 Auto before I jacked up front end to change control arms. I expected some suspension issues on lowering it back but no errors showing. Took it for a test drive and its as though the clutch is...

https://www.lrparts.net/vehicle/series-2-2a-3/seats-and-interior-trim/door-cards-by-britpart.html

The AC drains out by the heat shield, near the prop tunnel.

I have an original (ERR179) flywheel surplus to requirements. It was removed last April and skimmed and balanced in May (14/5/24). The skim removed 17thou (0.432mm) and since then has had only a slight polish, removing the witness marks (where...

No idea mate but never had any fail like this before, they've only been fitted about 6 months

I'm not sure how many more new tools my shed can take :D Yeah I mean its fun up to a point, but it does get a little frustrating when I can't take her out for a drive when I feel like it. I'm trying to get more things sorted now as I want to...

Mine would also be dead after 40 days without a charge.

Don't regret, embrace, don't curl up at night and think 'whats next :confused:' ... think 'Yay, what's next ? :D more tool buying oppertunities and learning experiences' .... It is what it is.

As Arctic suggests it is probably nothing to be concerned about, or you will have probably noticed. But saying that, you have what looks like a heat shield there so, possibly rubber or plastic pipes behind ? Clean the area shown and see if it...

I have a little used (never raced rolled or rallied) LOR Power/Extreme clutch and cover for sale, fits all the 300 or 200tdi engines. It was originally fitted in May last year (24) and has done less than 1000 miles. Will get some better pics if...