Latest activity

Just a heads up guys so you don’t get a nasty surprise but if your sills are rotted, check the centre/rear body mount just before the body arches up to the rear seats, if that’s rotted then you’ll most likely have to replace the corner of the...

Already done ..just putting feelers out in all directions lol

Thank you. I’m going to put on a spare starter when I find it in the shed - it’s still an original Lucas so will give that a service and see how it gets on.

Just listed some D2 bits, need to clear the garage.

In Worcester, rear ACE anti roll bar, tatty, ram ok but starting to rust. Will be going to tip if no one has it. Would suit someone wanting a spare to rebuild. I managed to get a brand new one, when I hose converted. Collection only, need to...

Will be collect, in Worcester, unused decat pipe, just never got round to fitting, also had to have new cat for an MOT. So offers, need to clear the garage.

Tried the spare key?

Morning everyone. Another sunny day for ignoring today.

I got a standard cheap one from Amazon, £16 I think? I needed quick delivery as it was purely for a test. But it works! I’m going to eventually get a facet style one off eBay as lynall suggested and chassis mounting it. Probably will have to be...

Google does… these ones? https://www.jgs4x4.co.uk/freelander-2-front-brake-pads-mintex/

Fingers firmly crossed: I think changing the relay has helped, if not sorted it! It's starting! However, I'm still getting a problem with the temp gauge. Earth issue? In less than 10 minutes, the gauge is climbing well towards the red. I'm...

Just to give you an update, I changed the drive belts for new ones yesterday and started up. No noise! Fingers crossed, I'll check again today for any noises. However, after running for less than 10 minutes, the termperature gauge was...

Try

Unfortunately it never came back 🤷🫣

Hi all, wanted to share a recent upgrade to my D2. I bought a full exhaust kit from a shop in Massachusetts (TWS)… they had great support and offered custom built long tubes and a magna flow cat back system with an ECU tune to match. Would highly...

What is the procedure to add the fluid correctly please?

Thought of that and as soon as it goes off go put with powerful torch but drive gs ayes closed, long drive and no signs of intruders to date. Thnk U

Agh, I do have a moth problem with my security camera so that is a possibility, will check that out thk u

Story - bought 2005 RR back in 2022. The previous owner put a new battery from Walmart - EverStart H9, 950 CCA 3 month earlier. Year and half after purchase, beginning of 2024 battery died. Took it back to walmart and they replaced under warranty...

Cant we just give im some crayons or marbles to eat instead.

Quick update - a friend of mine has a very big air compressor and blasting kit/gun. I've been researching and I've been reading soda blasting is good, which gives a good finish with the benefit that it doesnt wreck rubber or wiring etc...

Never knew you could glow in the dark fluid for oil and fuel - that is genius! On it!

Also check with a long straight edge that all pulleys are in alignment.

Funnily it was the left one that he fiddle with, but this was in Merkin land where I understand they do not know whata roundabout is!!!

Finished off the bits attaching the wheel arches to the inner wings, these now feel much more solid. Then made up a new patch for the hole where the seatbelt mount had rotted out. I reattached the original reinforcement panel to the back of it...

You will regret only doing a section, cut it all off & do it properly. There is more prep than welding.

Ive done thousands of wheel alignments over the years also been on training courses bla bla All done by lasers sometimes its experience setting them up & not going by oem settings, even different types of tyres can act in setting toes in out you...

I was just replacing those ones with black poly bushes as I knew I'd be struggling to replace like for like without a press etc.