Latest activity

CHF Synthetic Central Hydraulic Fluid Power Steering CHF11S CHF202 5 Litre 5L Recon this should be ok, what do ya think ?

Gorra link? Change the www to ww***w at the beginning to stop LZ messin wivvit.

Stirrer! ;)

Needs to meet the correct spec in my opinion. Have a look in the owners manual for the spec. LR still sell it but only in a box of 12x 1L bottles. So most main dealers won't buy it in unless you buy the box. Mine wouldn't when I wanted some...

OK it is time to "fess-up". It was the rocker gasket after all. :) The LH screw-down T-Bolt was not as tight as the RH side one. One extra quarter turn (to match the resistance felt on the RH side one) and the leak stopped. So well done all...

It was a Nissens one from 10, maybe 12 years ago. Looking at the prices those ally Direnzo ones are near enough the same price as aftermarket. My concern is it is only 2 core and someone on here once said the Land Rover original ones were 4...

Been out for a quick blatt around town in the mini. :) It always makes me smile. Oil leak sorted it seems. :) Worried a bit about over-fuelling and bore-washing the engine, but hard to say without an AFR gauge fitted. Nearly time for afternoon...

Found some green stuff local but not chf202, will that do ?

Me doors are straight. Still atta right angle. Eye put pic's on ere some years ago. Each one is a square version ov a number 8, wiv two diagonals, both wiv notches top and bottom so the diagonal cant move. So they is quite strong. Me hinges dun't...

Ma hippo needs to get his dpf to 23 so he can regenerate. Few weeks ago he were on 17. Checked last nite after wuk and he were on 22.5. He dun't do many miles so it wood take several days to get to 23. We both like to go ferra drive to hexercise...

... which is why it isn't clever to swop the lifters around!! Camshafts are fascinating things. I had a member of my club who designed his own cam and had it ground to his spec by Kent or Someone. It ran fine. I put a high torque cam in a Pinto...

Check the edge of the door is vertical with a spirit level, in the closed position and again at 90 degrees open position. This will indicate if the hinges need adjusting.

Fell out wiv me garage doors recently. They have moved so the wheels dun't touch the ground when closed. This means they pull apart slightly so the key has started to bent as turning it requires the doirs to pull togeffer. Eye has put some bits...

Don't think she's much into the latest fashion. Mayeb he's got her some more copper!!! 🤣🤣🤣

You'll have noticed we are not at "Rock and Cars". W has to keep her foot up and off it, and I am not trying to wheel her around a town crowded with peeps. I had the devils own job getting her from the parked car to the chemist's yessdi. No...

Different makes charge more as their kit is betterer. Price matching to a price point or competitor sometimes. Either was its betterer for the environment if peeps use one charger and set of batteries across multiple tools.

Buying the origional LR spec pas fluid for a FL2 ain't easy. Fuchs titan chf 202 is the same fing. Its what I use. The red you have in needs removed or you'll get problems. Change the reservour at the same time. Its got a fixed filter in the...

Nitriding or summat maybe, but they would all need to be treated or they would all wear out in nothing flat. usually heat treament, induction heating for instance. And as mentioned above they have to be run in properly with the special lubricant.

This tells us a bit more about V8 cams, bit off topic though. https://www.v8forum.co.uk/forum/viewtopic.php?t=9405

Let me know when you are ready - I can get my old F1 code and serial number

3.5 engines were renowned for getting through cam shafts. No idea why though.

Well I think we have given him some good ideas of where to go with it.

For thos who watch "Repair Shop"...

That'll go down like a lead balloon! ;)

Not knocking South Korea in the slightest. Just that postage and customs can really take the pea. I was quoted £1.65 for a bolt that keeps the oil pump on and £20 odd for postage from the UK to France. So from the UK to SK may well be an...

About 4 tonne of lead, so I heard :p

Exactly that, but I would want to do it privately for OUR community here. Let's park it until the autumn and I'll post an invitation for serial numbers and lock codes to evaluate, once I have checked out my setup as I get back to speed. From...

Wonder how easy it is to get this stuff in South Korea.

I did call a member of staff over to be sure the box we were looking at DID have all we needed in it. small print is SO ageist, don't you think? 🤣🤣🤣

Catch 22