Latest activity

Mine was exactly the same. I used PaulP38.com as a guide. He gives a good write up with pictures

I've got a pickup back that's too far gone to be salvageable. I was just going to scrap it - it's been offroaded and the dents have gone beyond dents and turned into tears... It's not even worth plating it. But the front end of it is ok...

Yeah thats pretty much the conclusion i came to too. Itll work to run a normal cut ring and pinion in the front but its gonna be abit more noisey and wear faster and be weaker(but the fact thats its only an 8 tooth pinion makes it way stronger...

Petrol series known to cut out due to fuel vapour lock because of the overheating. Are you losing coolant? Has your rad got all of its cooling fins? A hand held IR temp reader is a good tool to check which parts of a cooling system is doing its...

Mornin Dry bright and sunny Inspector coming this morning to look at my new uneven bathroom floor 🤔 Just admiring my 'new' Land Rover on the drive 😍 Start of another week, hoping for a good one Stay busy all

Morning all, Pulled the F2 this morning and took it out. Same symptoms I'm afraid. Other things it does that may be related - at full chat pulling around 3.5-4k it surges very noticably. It also has a habit of overrevving when changing gear...

Not fitted, was under the car when changing the IRD!

I have been driver and passenger in the car! It is definitely on the driver's side!

Not sure, the other half does not think so!!

Hi Marty - Im more familiar with Audis than the p38 Ive now got ... Is there any particular model Audi to remove heater core from and what accessories - pipes etc do you reccommend taking too? If you would Many thanks Mike

There was a debate about this some time ago with the 2/4pin diff variations. As far as I remember the one needs to be reverse cut to avoid long term wear. Bemble would probably know

Your a machine too 🤙

And in between all of the landy stuff I managed to give the bike a service before the trip

Rear wheel arches strengthened with formed inner ali sections panel bonded into place, few other repair sections fitted. New inner wheel arches bonded and rivited along with new floor and rear cross section all bonded rivited and bolted using 5mm...

I don’t know what the actual original problem was but I found out my replacement fuel filter housing didn’t include the non-return valve so I’ve got one ordered. Hopefully there’s no more problems.

Brush pack and voltage regulator one combined on many alternators. Unless you have some equipment on board with a heavy drain and in use for long periods on the batt there is little point in having a larger than standard alt. All it will do is...

Cheers! 🙂

I was a teenage hooker 😲

Traded it in for a 2020 Disco Sport 6 months ago 😉

Unfortunately the autel 808 only sees it as an x5... I'm not sure if gap iid is the best for this year model. The later l322s are recognized by the mx808, 2006 onwards.

Damn, that's some mod work you got going on there. Very very few of of us on here do serious mods like your doing and this may be above some of us to answer dude. 🤔

In honour ov the chap that died recenlty eye cooked me bacon for me sandwich on me mean green grillin fing.

Is he the one on the right.. 🤣 🤣

I should add that I dun't like bmw and merc's. Their success in the 80's and 90's for being betterer helped kill oft the british car market. Its not all bad. When bmw bought LR they got involved with development projects on day one. The...