Work light

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

satchmolips

Active Member
Posts
422
Location
Worcestershire
Have 110 pick up which I don't use a cover on. Has front spots and a light bar on roof with 4 forward facing work lights. I need something on the back. Either flat mounted on the back panels near the tailgate (so would want a live feed from sidelight and light would need a switch on it). Or other option would be to mount on light bar pointing backward, again switched!? Or any other suggestions welcome
 
Don't use the sidelight wiring to provide a live feed for the work lamp, it's not really sturdy enough. Just run a new feed back direct from the battery and controlled by a switch in the dash. Might as well stick a relay in it too
 
Don't use the sidelight wiring to provide a live feed for the work lamp, it's not really sturdy enough. Just run a new feed back direct from the battery and controlled by a switch in the dash. Might as well stick a relay in it too

This. Piggybacking off existing circuits is usually asking for trouble. If you wanted it to be controlled by the side lights, you could have a relay switched by the side light circuit, with the power coming from a separate fused connection.
 
There was a similar thread a month of so ago, I posted up some photos of my work lights on the back of my 90 with some action shots. They are really good and are up badged durite 6 LED lamps.

Due to the fact that taptalk is now completely useless since the last update, and I now have to use the main website on my iPad, I have no idea how to link to my old posts.

Otherwise I would be more helpful.
 
Back
Top