M
matt
Guest
Hi,
Ok interesting problem for those who like ignition systems and
things that don't start under odd circumstances.
My LandRover CSW 110 (1996) will not start unless I cross
the solenoid with the ignition (black cable).
Readings on the meter are.
With the original circuit. 9.85v to the wire when on or off.
(ignition switch upper most = on, off = when dash lights
are on only), totally off there is no reading at all.
i.e no extra boost to 12.5 v, when on.
Now if I was to take a reading from the relay switch
(back of)....
With the original wire (black) still on the solenoid
I get the following readings.
|(a) = 9.85v |(b) = 9.85v
_
(c) 3.5v
When the switch is turned on (i.e power boost)
|(a) 9.85v |(b) 9.85v
-
(c) 0 v
------------------------------------------------------
Now to a new lead (from the solenoid to the relay (by
passing the inner wiring lume
Off position (only dash lights on).
|(a) 0 v |(b) 0v
_
(c) 0 v
On position
|(a) 0v |(b) 12v
_
(c) 12v
--------------------------------------------------------
Relay pins
a = 86 (red black)
b = 85 (white + white/red)
c = 30 (grey)
d = 87 (brown (N))
-------------------------------------------------------
Any help would be great
--------------------------------------------------------
Regards
Matt
