austen
Active Member
- Posts
- 455
- Location
- Worcestershire/Shropshire Border
Pump is leaking, and have found a cheap Rover PAS pump. They look identical, but is there any difference??
Will a rover K series PAS pump fit a 1.8 Freelander?
- Thread starter austen
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
aussielander
New Member
- Posts
- 468
- Location
- Western Australia
give it a go, offer it up and see
austen
Active Member
- Posts
- 455
- Location
- Worcestershire/Shropshire Border
missed out on it, it was on ebay. Looked closesly at the pictures and it looked different on the one side.
Northern Irelander
Well-Known Member
- Posts
- 2,890
- Location
- N. Ireland
It should be the same fit for the mounting brackets. The intercooler pipes will be different lengths on the FL.
Are you having PS problems?
Are you having PS problems?
austen
Active Member
- Posts
- 455
- Location
- Worcestershire/Shropshire Border
I was, got a 2nd hand pump from a freelander for 45 quid and all working fine now. Well apart from the clutch giving up the ghost 2 days later!!! It only goes into gear when the engine isn't running, or if you match the engine revs to the speed. Once in gear its fine, and when stationary with clutch depressed, car is slowly pulling, so the clutch is working but not get full movement. I am suspecting it needs new slave/master cylinder, but am going to investigate tonight, not had time since it packed up.
