Which way

Telboy111 · Mar 2, 2012

Didn't take enough photo's on strip down, the front leafs on my series11a have a spacer on one side where the pivot arm (if that's what you call it) the rear of it, is. does the spacer go on the inner side of the chassis or outer side, I think inner but not sure, it also has a longer bolt and can't see the reason why, my son removed that bit so need Help!!!, thanks in advance

johnny curt 1 · Mar 2, 2012

the spacer goes on the inner side of the spring so that the outer edge of the spring follows inline or parralelle to the outer face of the chassis rail

if its on the outside the springs will look obscure and a mile out of square

hope this helps

Telboy111 · Mar 2, 2012

johnny curt 1,
Thanks for your help.

johnny curt 1 · Mar 3, 2012

forgot to mention as it was late when i answered last night the longer bolt goes through the chassis rail and the shorter one through the shackle pivot joint with the spacer in it

Telboy111 · Mar 6, 2012

Back again, there are two "L" shaped peices which bolt between the leaf springs and axle, I'm almost sure they go on the rear axles and I thinkin front of the shockers but not sure enough, anyone know!:lvlove-158:

johnny curt 1 · Mar 6, 2012

they go between the leaf springs on the back axle behind the axle they are there i think as a stabilizing plate for the brake lines ( well thats where they are and what theyre doing on mine )

Telboy111 · Mar 6, 2012

Thanks johnny looks like I have to take them off again and turn them round

Which way

Telboy111

New Member

johnny curt 1

Well-Known Member

Telboy111

New Member

johnny curt 1

Well-Known Member

Telboy111

New Member

johnny curt 1

Well-Known Member

Telboy111

New Member

Similar threads