Wheel Spacers Torque Settings.

Hi, l’ve just bought some second hand terrafirma hubcentric wheel spacers. Can anyone advise me on the correct torque settings?

1.Put the car into gear and apply the hand brake, loosen front wheel nuts, raise vehicle on a jack and then support the front axle on axle stands.
2.Remove the front wheels.
3.Bolt the wheel spacer/ adaptor to the hub using the new wheel nuts supplied and torque the nuts to 130Nm or 96lb/ft.
4.When both sides are done fit the new wheels lower the car off of the axle stands and torque the wheel nuts to 140Nm or 103lb/ft.
5.Loosen rearwheel nuts, raise vehicle on ajack and then support the rearaxle on axle stands.
6.Remove the rearwheels.
7.Bolt the wheel spacer/ adaptorto the hub using the new wheel nuts supplied and torque the nuts to 130Nm or 96lb/ft.
8.When both sides are done refit wheels lower the car offof the axle stands and torque the wheel nuts to 140Nm or 103lb/ft.

Thanks, that’s really helpful.