Wheel Arch Clip Thingys
- Thread starter steve52
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
landroversforever
Active Member
- Posts
- 416
- Location
- near Oxford
you mean the ones with the puck out rod in the centre? try you local landy specialist, they should have some, there an arse when you loose the middle stick bit!
discomania
Well-Known Member
- Posts
- 6,947
You can get the clips from most places, they are used in lots of things other than landys, check out the size of the hole and get clips to suit. I don't know the name of them, but if someone does, its then just the case of googling them, or look on ebay.
Or you could get the hex rivets, they are rivets but once in place can be un-screwed by a little hex head.
Or you could get the hex rivets, they are rivets but once in place can be un-screwed by a little hex head.
Bradj999
New Member
- Posts
- 353
- Location
- Portishead,Bristol
I've just done some body work to mine and like you broke most of the clips, I used 10mm short self tapping bolts to good effect. They are easy to remove and reuse in the future if you have to get behind there again
woods767
Well-Known Member
- Posts
- 1,262
What are u lot on about? Just bolt the things on then they dont fall off when u lean on them or whatever.
Richard.
Richard.
Similar threads
