What wheels for Disco 3?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Amicles

New Member
Posts
6
Location
Northumberland
Just had my 2007 Disco 3 to the garage and they’ve advised the ‘slow punctures’ I thought were the problem are more likely down to the knackered alloys. Does anyone know what other Landy wheels are compatible (hoping 2004 defender 110 as been offered some lol) or best place to buy some? Cheers in anticipation :)
 
Just had my 2007 Disco 3 to the garage and they’ve advised the ‘slow punctures’ I thought were the problem are more likely down to the knackered alloys. Does anyone know what other Landy wheels are compatible (hoping 2004 defender 110 as been offered some lol) or best place to buy some? Cheers in anticipation :)

Defender is 5X165 pcd so no chance of them fitting your hubs

S/H look on eGay and BumTree for wheels.

Loads out there but be sure to check they're not bent buckled and fooked when you get there.
 
Will refurbed wheels last? Looked on EBay but they look even worse than ours ;)

If done properly yeah. Sure I've read Volkswagen T5 wheels fit disco 3 but don't take that as gospel!

Edit ignore that, ive just googled it looks like you'd need adaptors and all sorts
 
Last question (for now anyway!) probably being stupid but will a disco 4 wheel set fit a disco 3?

Hi @Amicles

If i may say as a side note , Don’t fit RRS rims or tyres on a D3 as there not suitably rated , tyres for a D3 must have a weight sidewall rating of 111

D3 rims are ,

PCD = 5x120
Offset = 53P
Center Bore: 72.6 mm centre bore
Wheel Fasteners: Lug nuts
Thread Size: M14 x 1.5

Some D4 wheels will fit but must make sure offset is ok , same with FFRR rims, making sure the offset is correct

Suitable tyres

https://www.disco3.co.uk/wiki/Tyres_suitable_for_the_Discovery_3

Also I’m pretty sure D1 & D2 won’t fit

Hope that’s helps
 
Last edited:
Hi @Amicles

If i may say as a side note , Don’t fit RRS rims or tyres on a D3 as there not suitably rated , tyres for a D3 must have a weight sidewall rating of 111

D3 rims are ,

PCD = 5x120
Offset = 53P
Center Bore: 72.6 mm centre bore
Wheel Fasteners: Lug nuts
Thread Size: M14 x 1.5

Some D4 wheels will fit but must make sure offset is ok , same with FFRR rims, making sure the offset is correct

Suitable tyres

https://www.disco3.co.uk/wiki/Tyres_suitable_for_the_Discovery_3

Also I’m pretty sure D1 & D2 won’t fit

Hope that’s helps
That's brilliant - thank you so much for all your help
 
That's brilliant - thank you so much for all your help

Ur very welcome, good to hear it was useful

There’s plenty of very knowledgeable members here to help , also there’s never a daft question, I ask them all the time, lol
 
What ever you do don't neglect the following thingf copied from the D3's owner's handbook:

D3-4 Wheels+Tyres.jpg
 
Back
Top