What doors would fit my '73 109"?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
magicdrshoon

magicdrshoon

New Member
Posts
74
Embarrassingly enough I still am not sure what series my landy is! I think it's a 3.

That said, what doors would fit it? would I be able to use doors from a series 1, 2, 3, and a defender? Or would I have to get series 3 doors?
 

Attachments

  • PICT0021(small).JPG
    PICT0021(small).JPG
    60.9 KB · Views: 155
That's a series 3 I think.
Series or Defender doors will fit, either lift up or push button handles. You just need to change the striker plate to suit.
 
Well that pic has
Series 3 window hinges, door hinges, bonnet hinges.
It has series 3 skirts (Shorter than a 2)
It also has a series 3 grill and if its got a hole (For the heater intake) on the Nearside wing then I'm pretty sure you have a series 3.

and as Trew says for the door.
 
As well as the striker plate on the pillar, the door stay that stops the door swinging too far differs, so you will need to be careful, especially in strong winds.
I agree with the others, everything visible in the photo points to a Ser III
 
I just picked up a pair of doors for £15, with one lot of spare glass to boot!

And a rear door for £10

The drivers door neds a lick of welding, but other than that they are all spot on!

I've also managed to get 8 or 9 wheels and good tyres, steering box with virtually no play (with some other box that the steering goes in to!), and the whole interior, including the seat wells for £100

Bargain!
 
You must log in or register to reply here.

Similar threads

H
Swap grill and headlights from 2A to 3
Replies
4
Views
927
Tony Monsantoe
Tony Monsantoe
1988smithy
Door i.d
Replies
2
Views
295
1988smithy
1988smithy
Rhode rover
Double mounts
Replies
13
Views
3K
Rhode rover
Rhode rover
pikefly
New Gearbox
Replies
10
Views
907
steve2286w
steve2286w
A
One Piece Door Seals
Replies
9
Views
937
dag019
dag019
Back
Top