What bloody seal do i need

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
payydg

payydg

Well-Known Member
Posts
3,907
Location
Aberdeenshire
Its the rear hub seal for the rear axel for a 1991 200tdi defender 90.

Ordered a couple of different ones and non of them seem to look like the one thats in the hub.

Any help greatly appreciated
 
ftc4785 is a grease seal it has no garter spring and is for hubs with grease,rtc3511 is an oil seal it is used for hubs using oil
 
How do you guys set the wheel bearing pre load. I seem to remember the last time I did it I just took the play out of the bearings by tightening the nut by hand - I.e holding the big socket and turning it by hand not using a wrench.
 
payydg said:
How do you guys set the wheel bearing pre load. I seem to remember the last time I did it I just took the play out of the bearings by tightening the nut by hand - I.e holding the big socket and turning it by hand not using a wrench.
Click to expand...
yes just remove all play then fit tab washer and other nut tightening the outer nut applies enough preload
 
You must log in or register to reply here.

Similar threads

L
LR 90 Engine to flywheel housing gasket?
Replies
2
Views
619
lasher99
L
D
What IS this noise ?
Replies
12
Views
1K
dogdog1
D
tottot
Brake hose mystery
Replies
13
Views
407
tottot
tottot
s8ndst0rm
Am i going to find one?
Replies
2
Views
255
meego
meego
dag019
Which stub axle seal do I need?
Replies
3
Views
861
tottot
tottot
Back
Top