Hi All,
I have an ex military 2.5 n/a diesel which I have fitted into my series 2A 109. The engine is all fitted in but hooking up the cooling system is being a pain. The Series radiator has smaller outlets than the engine so none of the original hoses are any use. I am going to change the top of the thermostat housing to a series type which will sort that problem, but need to know if I can take the water pump off and fit a series water pump to that engine which will then give me the correct sizes etc to use a standard hose. Any advise greatly appreciated. Many Thanks.
I have an ex military 2.5 n/a diesel which I have fitted into my series 2A 109. The engine is all fitted in but hooking up the cooling system is being a pain. The Series radiator has smaller outlets than the engine so none of the original hoses are any use. I am going to change the top of the thermostat housing to a series type which will sort that problem, but need to know if I can take the water pump off and fit a series water pump to that engine which will then give me the correct sizes etc to use a standard hose. Any advise greatly appreciated. Many Thanks.
