Lincon
New Member
- Posts
- 8
- Location
- Lancashire
Hi guys my name is lincon. I have had my discovery 2 TDi on 02 plate 111000 miles for 4 weeks. Week 1, it started to leak desiel. Luckily it was under warranty so it went back. It turned out to be the fuel pressure regulator. Unfortunately the work completed was shoddy, the mechanics had the truck for 4 days and even though they changed the part it still leaked - I ended up paying a rite mechanic to do a proper job. So fuel leak fixed. I then noticed another leak. I have narrowed this down to a coolant leak - quite large patch after truck has been parked. I think this because if I soak up the fluid with some kitchen roll the fluid has a pink tint to it, the coolant i use is pink. My problem is I can't see where the leak is coming from. I have looked down and looked up but cant see much at all. The leak finds its way to the floor via the hole left by a missing screw in the plastic protective cover under the engine at the front. So no white smoke, no over heating, had all the covers off and can't see any issues with head gasket or pink staining, no issues with milky water and the heater seems to work fine with no gurgling. I keep topping up the water tank. My biggest fear is that I have a craked block. Any advise or pointers would be very welcome, thanks in advance guys.
