V8 Starters. Have I been sent the wrong one?

kooky_guy · Jun 19, 2015

Hi All,

Just managed to get my dead starter off and compared it with the new Denso starter from Island 4x4 to find that it's about an inch shorter.

The business end looks ok, but the part numbers are completely different. The Denso one has 26801 and DSN002 on it which doesn't match anything in the listing on Island's web site (Starter Motor V8 (Denso) RTC6061NG Island 4x4 - Specialists in Land Rover and Range Rover Parts and accessories for all models. UK and worldwide mail order.)

Anyone had one of these from Island 4x4 and/or know if it will be ok?

wammers · Jun 19, 2015

Does it fit will it start the car is the main concern.

kooky_guy · Jun 19, 2015

wammers said:
Does it fit will it start the car is the main concern.

It'd be nice if I could be confident of that before I fit the bugger, given the problem I have with the stripped top thread..

jacckk · Jun 19, 2015

My original one was a lot longer than the new one which is the same as yours from Island 4x4. Works fine

kooky_guy · Jun 19, 2015

Thanks Jacckk.

Just what I wanted to hear!

wammers · Jun 19, 2015

kooky_guy said:
It'd be nice if I could be confident of that before I fit the bugger, given the problem I have with the stripped top thread..

It's a Denso starter which is a direct replacement for the numbers listed.

tomcat59alan · Jun 20, 2015

Personally I would have given them a ring, they must have supplied hundreds.

Datatek · Jun 20, 2015

New starter motors of the geared variety do seem to be smaller, the new one for my digger was a good inch shorter than the original but actually spins the engine faster than the original ever did.

kooky_guy · Jun 20, 2015

wammers said:
It's a Denso starter which is a direct replacement for the numbers listed.

I tried the lookup tool on their website but they don't have a starter listed for the P38.

Anyway, sounds like it's the right unit so thanks all.

wammers · Jun 20, 2015

kooky_guy said:
I tried the lookup tool on their website but they don't have a starter listed for the P38.

Anyway, sounds like it's the right unit so thanks all.

Look up the numbers listed on Rimmers site. You will be guided to after market or refurbished units. Part numbers on new starter are Denso numbers. The one you got is a direct replacement for ALL the numbers shown.

kooky_guy · Jun 20, 2015

wammers said:
Look up the numbers listed on Rimmers site. You will be guided to after market or refurbished units. Part numbers on new starter are Denso numbers. The one you got is a direct replacement for ALL the numbers shown.

Cool. Thanks Wammers.

kooky_guy · Jun 22, 2015

As a follow up to this, the shorter length of this particular starter means that it is much easier to fit, removing the need to use multiple socket extension bars running behind the engine mount for the top bolt.

Datatek · Jun 22, 2015

kooky_guy said:
As a follow up to this, the shorter length of this particular starter means that it is much easier to fit, removing the need to use multiple socket extension bars running behind the engine mount for the top bolt.

Good news then

wammers · Jun 22, 2015

Does this prove that really good things come in small packages?

V8 Starters. Have I been sent the wrong one?

kooky_guy

Well-Known Member

wammers

No longer with us, RIP

kooky_guy

Well-Known Member

jacckk

Active Member

kooky_guy

Well-Known Member

wammers

No longer with us, RIP

tomcat59alan

Well-Known Member

Datatek

Well-Known Member

kooky_guy

Well-Known Member

wammers

No longer with us, RIP

kooky_guy

Well-Known Member

kooky_guy

Well-Known Member

Datatek

Well-Known Member

wammers

No longer with us, RIP

Similar threads