Upgrade brake servo

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

SilverFox44

New Member
Posts
3
I have a ex military 110 1985 land rover and see you can upgrade the brake servo to the td5 i think.
Is this possible on my land rover?
If not is there an upgrade?
SilverFox44
 
Are you sure your servo is not right? Where have you found your info on upgrades?
There was more than one type fitted in the 80's. A talk with John Craddocks parts could be useful.
 
That's because it's for a 200, 300 or td5 to upgrade it to take the later type abs servo and improve braking on those. You could fit a new servo of the type already fitted and it'll help but there are a lot of other things you could do that would improve your brakes
 
To fit the later servo I think you need to fit the complete pedal Assembly. I did this on my ‘89 but only to remove the bias valve as fitted the later mode master as well. It made no difference to the brake performance though and I would not consider it an upgrade. It just meant I could fit rear discs without needing to change anything else.
 
Back
Top