Turn signals problem

Hi I have a problem with the flashers. The other day I stopped working, I changed the relay and solved. But today they have again broken. They do not work and stays on the trailer flasher light in the control instrument.
What can happen? You again relay is broken?

Its ok, very few people in the UK use their indicators.

Whats an indicator?

I had this problem and it turned out to be an earthing problem.

Edit: Do they work okay if you disconnect the trailer?

a problema with Google traslator. flashers is the right translation

Flashers/indicators/blinkers

Oh boy.

lorri789 said:

I had this problem and it turned out to be an earthing problem.

Edit: Do they work okay if you disconnect the trailer?

Click to expand...

Can you explain me how do you resolved the problem please?

thanks

You need to get hold of Manuel.

The trailer is disconnect

Okay, have you checked the fuse?
Check the wiring at the back of the indicators---they have a habit of coming off.
HAs the relay got wet?
Check to see that the wiring is not worn and rubbing on something and shorting out.

It could also be the metal contact on the stalk. Happened to me with a Ford Granada

Hi, I check fuses, wiring but I don't find nothing.

Here a photo of the problem.

I think the relay is broken again...

Ah! Would I be correct in saying that the indicators are not working, but the hazard lights are?

Have you checked the wiring at the rear? I'm talking about where the wiring comes down from the rear light socket?

I'm not good on the wiring and electricity stuff

the indicators don´t working, and the warning don´t working. But when close the card and the alarm is arming, make the three blinkers how indicated the alarm is armed.
Where is the wiring at the rear?
I think is possible a wiring problem, because I remember that the blinkers was broken when I turn to the right twice.

Thanks lorri789, and don´t worry, I´m the worst on the wiring electric stuff.

Hi again.

If you look under\behind the rear light on the right hand side as you are looking at it from the rear there should be a socket where the tow wiring connects. this often cracks away - I would look there. Follow the wiring from the socket on your tow bar.

ok, I will check it, Thanks

Hi again!!

After a time, that the blinkers work fine, I have the same problem again. I think the problem is in the trailer wire pre-installatión, but I don´t find where is the problem, so I decided unpluggled the trailer´s wire on the relay. Is there any problem to do this?
By other hand here a photo of the old relay. It´s burned. How is it possible?



Thanks

Bad earth connection.

kevwill said:

Bad earth connection.

Click to expand...

Can you explain me why it´s caused this bad earth connection??? How can repair it? What must be check it?

Thanks