Hi all i hope this is in the correct place.
my 90 has developed a problem. When pulling off there is almost a resistance in the drive train as if two gears are not quite meshing properly and are then slipping past one another. It is that bad, that if you move say one yard, until is almost makes the banging noise, it will actually rock the vehicle backward say a half a foot (i think this is the torsion in the halfshafts shafts) If you accelerate upto around 15 MPH (this is as fast as i dare go with such an issue) these 'bangs' become so constant it sounds like a grinding noise. Obviously the quicker you move the quicker the banging noise will get.
any help would be massively appreciated.
As a side note, this weekend i drove it 40 miles did 2 days of winch challenging and then drove 40 miles home and it performed faultlessly. I parked it up for around 20 minutes while i had tea then went back outside and went to move the vehicle and this fault had developed???
Any ideas?
cheers
my 90 has developed a problem. When pulling off there is almost a resistance in the drive train as if two gears are not quite meshing properly and are then slipping past one another. It is that bad, that if you move say one yard, until is almost makes the banging noise, it will actually rock the vehicle backward say a half a foot (i think this is the torsion in the halfshafts shafts) If you accelerate upto around 15 MPH (this is as fast as i dare go with such an issue) these 'bangs' become so constant it sounds like a grinding noise. Obviously the quicker you move the quicker the banging noise will get.
any help would be massively appreciated.
As a side note, this weekend i drove it 40 miles did 2 days of winch challenging and then drove 40 miles home and it performed faultlessly. I parked it up for around 20 minutes while i had tea then went back outside and went to move the vehicle and this fault had developed???
Any ideas?
cheers