trans fail safe message, suspension inactive, hdc inactive, abs light on.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

shawser

New Member
Posts
42
All these lights came on today. New gearbox fitted a few weeks ago, car running so good now, then today, these messages came up. Suspension won't move. Car drives fine. Gears all working perfect.
 
Got battery checked and the alternator. Battery showing 14.4v@2k rpm, 13.9 @ idle. Alternator is fine. Twice today it didn't come on for a mile or so, then on as soon as ignition on.
 
It seem to have started after I blasted under arches with power washer, then I gave it a good blast along road around 80 mph, that's when messages came up, so I'm thinking a speed sensor or height sensor
 
It seem to have started after I blasted under arches with power washer, then I gave it a good blast along road around 80 mph, that's when messages came up, so I'm thinking a speed sensor or height sensor

I had this on mine when I first bought it over 2.5 years ago....went through a puddle and the bells and whistles went off...turned out to be a dicky height sensor connection....removed connector cleaned it up with contact cleaner and a tooth brush....fine ever since (touch wood!!)
 
That's what I'm hoping it is. Looked under car and the height sensor connection is certainly very exposed. Just seems a bit of a coincidence it happened after washing that area
 
Ok, something new to think about. This morning when driving away in car, no messages came up, but car would hardly move, felt as if abs was coming was coming on and braking the car. I worked handbrake up and down and it seemed to help. So thinking it is a sensor?
 
Diesel. Phoned local 4x4 land rover specialist, it's going there soon. He thinks it's either abs or front drive shaft. Could be traction control. Apparently the coupling goes. I'm hoping it is, as it's covered under warranty.
 
Back
Top