Temp guage and heating wierdness

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
saxon101

saxon101

Active Member
Posts
448
Location
Austria
Hello,
I have recently had a new 300tdi engine from a disco, fitted to my defender, after it seized. Since then, I have had problems with heat. My temperature gauge barely moves past the white line, even after an hours run, and the heater only blows cold/luke warm air. Any ideas?

Cheers
 
its got plenty of cooland, a new ally sport rad, all new gaskets throughout the engine, (though it leaks oil like the Exxon Valdese)
 
the temp guage appears to be working, it moves off the base line but barely gets past the white line. occasionally it gets to the quarter mark but as soon as you put the heaters on, it drops down again
 
If you are fitting a new 'stat, only bother with a waxstat. I had a brand new pattern one and clearly it was not working properly and staying closed when it was supposed to. I have a digital temp gauge so I could see exactly what was going on temp wise. Fitted a waxstat and it's fine now.
 
You must log in or register to reply here.

Similar threads

R
Discovery 2 heater issue
Replies
1
Views
171
sierrafery
sierrafery
E
Discovery Sport cabin temp sensor fan location?
Replies
1
Views
2K
Graculus
Graculus
T
200tdi temp gauge woes
Replies
16
Views
3K
Seaswood
Seaswood
Stance
Freelander 1 Testing coolant temp (TD4)
Replies
6
Views
1K
Nodge68
Nodge68
T
HELP!!! engine overheating - at the end of my tether!
2 3
Replies
52
Views
4K
bendisco
B
Back
Top