TD5 clutch problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
L

LandyBoy2022

New Member
Posts
6
Location
Derbyshire
I want to know if anyone has has the same issues as me with my clutch. I have replaced the clutch, the slave cylinder 3 times and the master cylinder. Bled the clutch up numerous times to get a good solid pedal. I will use my Land Rover for about a week or so and suddenly will get no resistance on the clutch pedal. Sometimes it will be fine and then overnight I will get no clutch resistance on the pedal. Tried bleeding it numerous times and keep getting air whenever I bleed it but I can’t see any leaks from anywhere. Having to keep bleeding the clutch. I don’t wanna take it on long journeys because of this problem. Anyone able to help. Thanks
 
LandyBoy2022 said:
I want to know if anyone has has the same issues as me with my clutch. I have replaced the clutch, the slave cylinder 3 times and the master cylinder. Bled the clutch up numerous times to get a good solid pedal. I will use my Land Rover for about a week or so and suddenly will get no resistance on the clutch pedal. Sometimes it will be fine and then overnight I will get no clutch resistance on the pedal. Tried bleeding it numerous times and keep getting air whenever I bleed it but I can’t see any leaks from anywhere. Having to keep bleeding the clutch. I don’t wanna take it on long journeys because of this problem. Anyone able to help. Thanks
Click to expand...

Mentioning that the TD5 is in a Land Rover Discovery 2 might help ... ;)
 
LandyBoy2022 said:
It is in a Land Rover discovery 2 and if anyone has had the same problem
Click to expand...

bdfa0533246f95cba0df68ddf0627d07.gif
 
Is the fluid level dropping ?

If you need to bleed her she must be getting air in some where

What brand of cylinders did you fit and have you changed the flexi hose ?
 
The fluid level doesn’t seem to be dropping.
The slave cylinder was TRW make I think and the master cylinder was Britpart I think. I haven’t changed the fleck hose because it’s got a solid metal pipe from the master cylinder to the slave cylinder.
 
You must log in or register to reply here.

Similar threads

J
Jazbo
Replies
1
Views
710
miktdish
miktdish
Lej
Discovery 2 Clutch failure
Replies
2
Views
581
Lej
Lej
S
Trouble bleeding clutch SIIa
2
Replies
26
Views
1K
Samoth
S
MuddyMat
Disco2 2004 TD5 clutch misbehaving
Replies
5
Views
732
MuddyMat
MuddyMat
RudeBoyPL
Disco 2 strange balance readings when rolling with clutch pressed
Replies
0
Views
128
RudeBoyPL
RudeBoyPL
Back
Top