TD5 central locking on a 1985 Defender.

I’ve just fitted TD5 doors to my 1985 defender and they have central locking actuators fitted to them. So as to enable me to have power locks, what would I need to add to them? I’m not bothered about remote locking and all I can find on the net and through the forum archive is info regarding the 10as unit.

The drivers actuator is a 4 wire and the passenger is a 2 wire. I’ve already got the electric windows connected and working. Any help would be VERY much appreciated.

Really you need a control unit to work them. This is done via the 10as unit on Td5s with a built in relay.

You could try and use a box off a cheap set like Hawk circa £20 off ebay. Just connect up the wires correctly. Should work.

Do you know what the 4 wires are for on the drivers actuator?

The drivers door tends to have so e extra wires to signal back - this allows for example you to unlock the drivers door with the key and have it unlock the others doors. I have a hawk kit off eBay and that's how it works there