Hi I fitted a synergy2 to my hippo.....works fab no smoke, plenty of power and free revving...I am using it on setting 2.... however, if I use full power at around 4000rpm ...... one of the injectors blows the return fuel line 'T' out.......
I rang Ron (nice guy) who recons this is most unsuual ....... he thinks it might be occuring the moment I lift off....as the rail pressure spikes.....
It has done this twice now...... finally I got the clip and squashed it tight in a vice.......and then refitted it......it is now really tight. So far ok....keeping RPM below 3000.
Has anybody else had this........my engine has done around 114k and I was wondering if the plastic and the clips deteriorate with time......should I get a new return rail. By the way it did happen once when it std trim.
Car runs smooth and starts ok, no smoke and good power.
Your thoughts would be most welcome.:welcome2:
Richard
I rang Ron (nice guy) who recons this is most unsuual ....... he thinks it might be occuring the moment I lift off....as the rail pressure spikes.....
It has done this twice now...... finally I got the clip and squashed it tight in a vice.......and then refitted it......it is now really tight. So far ok....keeping RPM below 3000.
Has anybody else had this........my engine has done around 114k and I was wondering if the plastic and the clips deteriorate with time......should I get a new return rail. By the way it did happen once when it std trim.
Car runs smooth and starts ok, no smoke and good power.
Your thoughts would be most welcome.:welcome2:
Richard