ciderman
Active Member
- Posts
- 768
- Location
- sunny worcestershire
Hi
Will M 8 bolts do the job on the swivel housing- I have lots of them but no BSF.
thanks
Will M 8 bolts do the job on the swivel housing- I have lots of them but no BSF.
thanks
Series 3 Swivel to axle bolts
- Thread starter ciderman
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
no they are special bolts
ciderman
Active Member
- Posts
- 768
- Location
- sunny worcestershire
Even stainless steel?
yrs
yrs
tottot
Well-Known Member
- Posts
- 7,706
- Location
- west wales coast
You can not use stainless steel, it is a softer metal.Use the proper bolts,its a safety item.
ciderman
Active Member
- Posts
- 768
- Location
- sunny worcestershire
Ok, I have ordered 20.....
Land Raver
Well-Known Member
- Posts
- 2,015
- Location
- In the dog house
I replaced all of mine, torqued them up correctly. 6 months later I noticed a weep of oil from where the swivel chalice bolts to the axle tube end. The bolts needed retightening both sides. Just something to check a couple of hundred miles after your hub rebuild
ciderman
Active Member
- Posts
- 768
- Location
- sunny worcestershire
I paid a garage to do it for me- the gaiters from &&itpart don't fit!
LordOWar
Well-Known Member
- Posts
- 449
- Location
- North West
Where they the black rubber ones? If so I will avoid them and try the leather ones or just go au naturel instead.
