Sump Guard

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

badlad

Active Member
Posts
124
Location
N.Ireland
Hi. Currently have a 2012 SD4 which is missing its sump guard. Being a bit OCD I am trying to source one for it. I have seem some adverts which would suggest the the 2006-2011 have a different sump guard to mine. Any of you knowledgeable folks confirm this. Hate to have to return one due to is size
 
I don't believe the subframe changed, so presumably the guard is the same. The front bumper is slightly different, but there's another piece of plastic between the bumper shell and sump guard.
Don't forget that you'll need 6 X M10 flange head bolts to secure it, this is assuming the captive nuts are still in place.
 
I don't believe the subframe changed, so presumably the guard is the same. The front bumper is slightly different, but there's another piece of plastic between the bumper shell and sump guard.
Don't forget that you'll need 6 X M10 flange head bolts to secure it, this is assuming the captive nuts are still in place.
Many thanks Bud. Was looking at this one. Looks good enough as i wont be doing any hard off roading.

 
Many thanks Bud. Was looking at this one. Looks good enough as i wont be doing any hard off roading.

Careful - that listing carries an import duty also…
 
Sump guard.
RV21piil.jpg
1

GJzV7NPl.jpg
2


ask if they will just sell you the sump guard and bolts.
 
Back
Top