P38A Strange burning smell

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

pete12345

Well-Known Member
Full Member
Posts
2,427
Location
Isle Sheppy
new pulleys fitted crank pulley and one other but got a strange burning smell from engine when put foot down then it goes leave car for awhile drive again and smell returns but not there all the time has anyone got any ideas what could cause this fanks in advance
 
Double check to see that you got the belt correctly seated on the pulleys. The grooved ones have an outer flange. If you've got the belt with its lip over one of those flanges, it'll go round and do all of its belt stuff, right up to the time when the lip has cut the edge off the belt
 
Checked the belt and seems all ok fitted properly it doesn’t smell of burning all the time it seems to be if u accelerate hard then after a little while the smell goes
 
Well it's a new belt just been fitted and checked was fitted right as per eairler post seemed all tight then but will keep an eye on it
 
Well it's a new belt just been fitted and checked was fitted right as per eairler post seemed all tight then but will keep an eye on it
Trouble is even new stuff properly installed is no guarantee of it working right,is it worse when the raids are wet? Maybe water getting up there and slipping it
 
Back
Top