start stop solaniod

D

diggingcontractor

New Member

Posts

66

• Aug 18, 2011

• #1

does anyone know how to make the thing work i have fitted a 300tdi disco engine to a 1986 defender there are three small wires coming out of the back a brown a white and a brown and black i have 1 live feed from the ignition what to do do you know?

 

L

lynall

Well-Known Member

Full Member

Posts

25,634

Location

Kent

• Aug 19, 2011

• #2

Im not sure of the age of you engine but i would say the three wires are fir the throttle position sensor for the egr
The stop solenoid is on the back top of the pump slightly hidden 8 mm smapper sized nut on the top some have a lucas flat male spade


Lynall

 

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Forum Sponsor

Posts

38,813

Location

Various

• Aug 19, 2011

• #3

later stop solenoid has electronic **** on top, can be removed and stop solenoid below supposedly or possibly fit earlier stop solenoid-either way covered before on here.

 

jamesmartin

Well-Known Member

Posts

91,879

Location

louth lincs

• Aug 19, 2011

• #4

you have to break plastic cover off rear of pump to expose solenoid and connect live wire with ignition on to it

 

D

diggingcontractor

New Member

Posts

66

• Aug 19, 2011

• #5

hi guys i smashed the plastic off the back and removed little circuit board and there is one black wire that goes to the solaniod crimped my ignition live onto it jobs a good un it works

what are the three wires that go into the top of feul pump? do i need them?