Disco 1 Standard Height HD Suspension

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Nick-TT

Member
Posts
15
Location
Peterborough
I'm looking to upgrade and refresh my shocks and springs on the 1994 Disco 3 door TDi and have been looking at Terrafirma kits however i'm a little confused and wondering if anyone can help.

I've seen a lot of kits that are suitable for Defender 90/Disco 1/Range Rover all at the same time, but the only Terrafirma HD kit i can find lists Defender 90 but not disco. Do these 3 cars share the same shock and springs set-up? (Might seem a stupid question, but for example by TT currently runs on VW Golf suspension!)

The kits i am looking at are one of the following;

http://shop.challenger4x4.com/terra...ion-kit-for-land-rover-defender-90-8014-p.asp

http://shop.challenger4x4.com/terra...ion-kit-for-land-rover-defender-90-8019-p.asp

So really i'm looking for advice on if they will

a) Fit my Disco
b) are the best standard height HD option (Car used for towing and maybe green laning)

Cheers in advance for any info! :D
 
No they are not the same, the Defender has has HD springs as standard due to the nature the work the vehicle is intended for, the early RR had progressive rear springs with a self levelling strut, and only the rear springs were upgraded to HD the so called 'police spec springs'.
For the D1 Land Rover had a rear HD spring option called HD in the parts book, also remember that diesel springs are handed and different rates to the petrol D1s.

There's a Land Rover spring rate list on the www with the colour codes for all Land Rover models using steel springs, j
 
No they are not the same, the Defender has has HD springs as standard due to the nature the work the vehicle is intended for, the early RR had progressive rear springs with a self levelling strut, and only the rear springs were upgraded to HD the so called 'police spec springs'.
For the D1 Land Rover had a rear HD spring option called HD in the parts book, also remember that diesel springs are handed and different rates to the petrol D1s.

There's a Land Rover spring rate list on the www with the colour codes for all Land Rover models using steel springs, j
Well that complicates things!! Thanks for the info!

Thanks for the info, it's seems quite tricky to find a full springs and shocks kit for the Disco that aren't with a 2" lift! o_O

Anyone got any magic links for kits?
 
There are loads of options. Just don't make it difficult for yourself. Standard springs are standard springs. I'm sure places like Paddocks list them and same as with shocks. Now if you want something that isn't standard, that's a different question. HD means heavy duty, ie a higher spring rate. This means the suspension won't sag as much when loaded. But unloaded it will probably sit higher. Stiffer springs will work well for loaded vehicles and towing, but when empty might ride harder and off road won't be so supple and might not flex as well.

Flatdog do some interesting springs. Might be worth a look if you want something different to normal standard springs:
http://www.flatdoguk.com/m/showdetails.asp?id=453&name=Disco+1+Std/HD+1
 
I'm considering these http://www.ebay.co.uk/itm/111735762091?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT
maybe same as in the post above?
but to match dampers to them would be interesting, I have yellow Bilstein kit in the garage ready to be fitted once I decide on springs:)

Rich.

That seems like a good spring kit, standard height with decent spring rates (Need these for towing 1700kg of car and trailer!).

I'll probably combine them with the Terrafirma HD shocks then;

http://shop.challenger4x4.com/terra...r-discovery-and-range-rover-classic-681-p.asp

http://shop.challenger4x4.com/terrafirma-4x4-tf116-all-terrain-front-shock-for-land-rover-defender-discovery-and-range-rover-classic-683-p.asp

Hopefully that'll give the setup i am looking for and at a decent price!
 
Back
Top