Hi Freelander 2004 SRS warning light on. Normally get cleared diagnostic tool plugged in fault codes can be easily erased & SRS off. Faults remaining under front seats LAUNCH123X Right and Left pretensioner resistance too high. I unplugged the yellow plugs under the seat cleaned with contact cleaner and put them back checked wiring all seems ok.Disconnected battery too, please help, I need to go through the MOT
SRS warning light Pretensioner problems
- Thread starter Anan
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Generally the steering wheel doesn't have seat belt pre-tensioners.
Have you checked to see if the pre-tensioner has fired? Are both belt buckles the same length, or is one shorter than the other.?
saxavordian
Well-Known Member
- Posts
- 9,270
Generally the steering wheel doesn't have seat belt pre-tensioners.
Hi Nodge68, Thank you once again.Never ignited.My scanner LAUNCH123x last few days detected these problems. I removed, soaked both Right & Left yellow plugs under seat disconnecting from the tensioner. After drying today, I connected one plug at a time and used the Launch, first checked the ABS FAULT codes. There were lots of error codes shown in ABS, erased them all. Then selected SRS, now only Right side still shown pretensioner high resistance, I selected & erased.
SRS warning cleared!! Don't know what happened. Thank you.
Generally the steering wheel doesn't have seat belt pre-tensioners.
Both same. Nodge. Today cleared the errors
Similar threads
Freelander 1
See light