SRS after new front seat.

Dylan040495 said:

Hi everyone, really hoping someone can help me here. I've recently bought a range rover HSE 2000. Now the guy who had it before me seems to have swapped the original fabric seats for leather ones, on the dash is SRS light and airbag fault. The wires don't connect anymore, all are 2 pin plugs. From the car I have a yellow and a black connector, both on the seats are white connectors, the passenger seat only had the yellow wire coming from the car, yet two coming from the new seat? Any help would be greatly appreciated. Says my pictures are too large to add them?

Click to expand...

Dylan040495 said:

Hi everyone, really hoping someone can help me here. I've recently bought a range rover HSE 2000. Now the guy who had it before me seems to have swapped the original fabric seats for leather ones, on the dash is SRS light and airbag fault. The wires don't connect anymore, all are 2 pin plugs. From the car I have a yellow and a black connector, both on the seats are white connectors, the passenger seat only had the yellow wire coming from the car, yet two coming from the new seat? Any help would be greatly appreciated. Says my pictures are too large to add them?

Click to expand...

Datatek said:

Sounds like the replacement seats do not have airbags fitted. I can give you details of a dufer to fool the SRS into thinking the airbag is there.[/QUOTE
Yes please, I have some resistors on the way but unsure which to use.

Click to expand...

Dylan040495 said:

Yes please.

Click to expand...

Dylan040495 said:

Update, I used a 1.5ohm resistor in the yellow wires and now all is fine.

Click to expand...